PE Monofilament Making Machine
Product ID: FCM
FCM series draw required amount of monofilament and simultaneously wind into beam. Then without warping again, the yarns winded on beams will be sent to knitting machine to make fabrics directly.
- Drawing the necessary yarns into the beam directly without warping again
- The tension of all the yarns are equal to raise the working efficiency of knitting machine
- The denier of all yarns are stable to increase the quality of fabrics
- Decrease waste
| Model | FCM-65 | FCM-55 |
|---|---|---|
| Extruder / Screw dia. | 65mm Dia. | 55mm Dia. |
| Extruder / Screw L/D | 26:1 | 28:1 |
| Extruder / Screw material | SCM 4 | SCM 4 |
| Extruder / Cylinder material | SACM 1 | SACM 1 |
| Extruder / Heater capacity | 12KW | 12KW |
| Extruder / Driving motor | 30 HP VS motor | 25 HP VS motor |
| Extruder / Hopper loader | 1 set | 1 set |
| Control panel / Temperature control | 4 points | 4 points |
| Cooling device / Cooling type | Water circulation | Water circulation |
| Take-off unit: A / Type | 5pcs. of roller | 5pcs. of roller |
| Take-off unit: A / Driving motor | 2 HP VS motor | 2 HP VS motor |
| Extension device / Type | Hot water trough | Hot water trough |
| Extension device / Heater capacity | 12KW | 12KW |
| Take-off unit: B / Type | 7pcs. of roller | 7pcs. of roller |
| Take-off unit: B / Driving motor | 5 HP VS motor | 5 HP VS motor |
| Annealing device / Type | Hot water trough | N/A |
| Annealing device / Heater capacity | 6KW | N/A |
| Take-off unit: C / Type | 7pcs. of roller | N/A |
| Take-off unit: C / Driving motor | 3 HP VS motor | N/A |
| Winder / Type | Direct | Direct |
| Winder / Number of beam | 2pcs. of beam | 2pcs. of beam |
| Winder / Driving motor | 1kgm torque motor x 2 | 1kgm torque motor x 2 |
| Dimension L x W x H (cm) | 14630 x 1755 x 2900 | 10490 x 1655 x 2000 |
Main Products:
raschel knitting machine, slitting and extension machine, monofilament making machine, whole - plant equipment for net and bag
