Product ID: 14

Rubber (NBR, MCR, Rubber, Epdm) / O Ring

Material: Buna-N (Nitride / NBR)
General Properties: Good resistance to petroleum, hydrocarbons, fuels. Widely used with most oils, hydraulic fluids, alcohol. Poor resistance to sunlight, weathering and ozone. Many compound variations for specific applications.
The least expensive most readily available material. Basic temperature range: -40 F to +250 F*
Common Applications: Petroleum oil seals hydraulic fluid seals water / greases transmission fluid seals.
Dimensions: Request and custom made.

Material: Viton (Fluorocarbon)
General Properties: Excellent temperature and chemical resistance. Excellent mechanical and physical properties, low compression set and low gas permeability. Not for use with Acetone, skydrol, or ethyl acetate. Basic temperature range: -20 F to +400 F*
Common Applications: Vacuum seals, many Acids and fuels Heat resistance, many chemicals, many solvents.
Dimensions: Request and custom made.

Material: EPDM / EPR (Ethylene Propylene)
General Properties: Resistance to sunlight, weathering and ozone. Poor resistance to petroleum oils and fuel.
Good heat and compression set resistance. Basic temperature range: -65 F to +250 F*
Common Applications: Steam / hot water, hydraulic / skydrol, some chemicals, auto brake systems, alcohol / greases.
Dimensions: Request and custom made.
Material: Silicone
General Properties: Broad temperature range, odorless / non-toxic, resistance to sun and ozone, fungus resistance, poor tear and abrasion strength, poor resistance to oils. Basic temperature range: -80 F to +400 F*
Common Applications: Dry heat, alcohol / oxygen, electrical / medical, low temperature.
Dimensions: Request and custom made.

Material: Neoprene (Chloroprene)
General Properties: Good resistance to petroleum oils, low compression set and good abrasion strength, good resistance to weathering, sunlight and ozone, Basic temperature range: -40 F to +225 F*
Common Applications: Refrigeration seals, freon / air conditioning, motor mounts, engine coolants.
Dimensions: Request and custom made.

• Rubber (NBR, MCR, Rubber, Epdm)
• Color: Black
• Thickness: 0.5 / 1.0, 1.5 / 2.0, M2.5 / 3.0, M3.5 / 4.0
• Applications: Skidproof Seat Cushion¡MCan Coat With Oil-Proof Rubber
• O Ring
• Color: Black
• Thickness: Custom-Made As Requested
• Applications: For Small Motors Of Fans

• Minimum Order: Negotiable