BT GPS Receiver
GP-252 is one GPS receiver that provides Bluetooth air interface, to transmit acquired positioning data from the satellites to near-by navigator or portable device. This receiver can be placed at a distance not too far away (e.g. less than 10m ) and where is more open to the sky to track the GPS satellites. The receiver can be carried or mountable. GP-252 is a small-size high accuracy GPS receiver, it uses a very low power-consuming GPS engine.
‧Bluetooth v1.2 specification compliant
‧High accuracy, fast start up
‧High sensitivity
‧Low power consumption
‧Built-in attena
‧Supports standard NMEA data format
‧High capacity Li-ion battery, rechargeable through built-in charger
- Frequency/code
- L1 1.57542GHz / CA code
- Sensitivity
- Tracking:-158 dBm
- Chipset
- u-blox
- Acquisition
- Cold/ Warm/ Hot start:34/ 33<3.59 sec
- Reacquisition: 1 sec
- Accuracy
- 2.5mCEP
- Antenna
- Built-in
- GPS Channels
- 16
- Update rate
- 4 Hz
- Data battery back-up
- Built-in
- WAAS support
- ready
- Bluetooth
- Standard: V1.2 spec. Compliant
- Antenna: Built-in
- Common
- Power: DC 5v/1A in, charger inside,rechargeable
- Li-ion battery pack
- Dimension
- < (L) 74 mm(W) 47 mm(H) 30mm
- LEDs
- Power, GPS, Bluetooth , Battery Low
- Switch
- Power on/off slide switch
- Opertion time
- >30 hr
- CE
- FCC
- CCC
Main Products:
Videophone, IP Phone, VoIP ATA/Gateway, WiFi Phone, HomePlug Adapter, GPS Navigator, Optical Network Unit, DVB-T TV, DC/DC, AC/DC, xDSL Transformer, Switching Power Supplies, Optical Passive Components