Ethernet Remote I/O module
Model: KD9015
Ethernet-based 7-ch RTD input
module
Interface:
Communication : 10/100 Based-T Ethernet
Protocol : Modbus/TCP, TCP/IP, UDP, ICMP and ARP
LED indication : LED for power and Ethernet Link status
Analog Input:
Input channels : 7 differential
Input Impedance : >10MΩ
Resolution : 16-bit
Input type : Pt100,Pt1000,Ni RTD
Input range : Pt100 (-50~150oC/0~100oC/0~200oC/0~400oC/
-200~200oC),Pt1000(-40~160oC), Ni518(-80~100oC)
RTD Standard : IEC RTD 100 ohms(?0.0385)
JIS RTD 100 ohms(?0.0392)
Isolation : Fully photo-isolation 3,750Vrms
Sampling rate : 10 samples/sec (16-bit)
Accuracy : ±0.1% or better
Zero drift : ±0.6μV/oC
Span drift : 25 ppm/oC
CMRR : 90dB min. @50/60Hz
Burn-out : Wire burn-out auto detection
Over voltage protection : +/- 35V
Power requirement:
Consumption : 2.2W
Power input : 10~30VDC (unregulated)
Model: KD9017
Ethernet-based 8-ch isolated analog input module
Specifications
Interface:
Communication : 10/100 Based-T Ethernet
Protocol : Modbus/TCP, TCP/IP, UDP, ICMP and ARP
LED indication : LED for power and Ethernet Link status
Analog Input:
Input channels : 8 differential
Input Impedance : >10MΩ
Resolution : 16-bit
Input type : mV, V, mA
Input range : ±150mV,±500mV,±1V,±5V,±10V,0-20mA,4-20mA
Isolation : Fully photo-isolation 3,750Vrms
Sampling rate : 10 samples/sec (16-bit)
Accuracy : ±0.1% or better
Zero drift : ±0.6μV/oC
Span drift : 25 ppm/oC
CMRR : 90dB min. @50/60Hz
Over voltage protection : +/- 35V
Digital Output:
Channels : 2
Sink type : Open collector to 30V, 100mA(maximum load)
Power dissipation : 300mW for each module
Power requirement:
Consumption : 2.2W
Power input : 10~30VDC (unregulated)
Model: KD9019
Ethernet-based 8-ch isolated
thermocouple input module
Specifications
Interface:
Communication : 10/100 Based-T Ethernet
Protocol : Modbus/TCP, TCP/IP, UDP, ICMP and ARP
LED indication : LED for power and Ethernet Link status
Analog Input:
Input channels : 8 differential
Input Impedance : >10MΩ
Resolution : 16-bit
Input type : Thermocouple
Input range : J type: 0~760 oC, K type: 0~1370 oC, T type: -100~400 oC
E type: 0~1000 oC, R type:500~1750 oC,
S type:500~1750 oC, B type: 500~1800 oC
Isolation : Fully photo-isolation 3,750Vrms
Sampling rate : 10 samples/sec (16-bit)
Accuracy : ±0.1% or better
Zero drift : ±0.6μV/oC
Span drift : 25 ppm/oC
CMRR : 90dB min. @50/60Hz
Burn-out : Wire burn-out auto detection
Over voltage protection : +/- 35V
Digital Output:
Channels : 2
Sink type : Open collector to 30V, 100mA(maximum load)
Power dissipation : 300mW for each module
Power requirement:
Consumption : 2.2W
Power input : 10~30VDC (unregulated)
Model: KD9050
Ethernet-based 18-ch isolated digital I/O module
Specifications
Interface:
Communication : 10/100 Based-T Ethernet
Protocol : Modbus/TCP, TCP/IP, UDP, ICMP and ARP
LED indication : LED for power and Ethernet Link status
Digital Input:
Input channels : 12
Input type : Dry contact
logic level 0: Close to ground
logic level 1: Open
Wet contact:
logic level 0: 0~10V
logic level 1: 10~30V
Counter/Frequency : Each channel support 3KHz counter/frequency input
Isolation : Fully photo-isolation 2,000Vrms
Digital Output:
Channels : 6
Sink type : Open collector to 30V, 100mA(maximum load)
Pulse output : Each channel support 5KHz pulse output
Hi-to-low/low-to-Hi delay : Each channel support high to low or low to high
delay output
Isolation : Fully photo-isolation 2,000Vrms
Power requirement:
Consumption : 2.0W
Power input : 10~30VDC (unregulated)
Model: KD9051
Ethernet-based 14-ch isolated digital I/O with 2-ch counter module
Specifications
Interface:
Communication : 10/100 Based-T Ethernet
Protocol : Modbus/TCP, TCP/IP, UDP, ICMP and ARP
LED indication : LED for power and Ethernet Link status
Digital Input:
Input channels : 12
Input type : Dry contact
logic level 0: Close to ground
logic level 1: Open
Wet contact:
logic level 0: 0~10V
logic level 1: 10~30V
Counter/Frequency : Each channel support 3KHz counter/frequency input
Isolation : Fully photo-isolation 2,000Vrms
Counter:
Channels : 2 (32-bit)
Maximum count : 4294,967,295
Frequency range : 0.2~4,500Hz(Frequency mode), 0~4,500Hz(counter
mode)
Digital Output:
Channels : 2
Sink type : Open collector to 30V, 100mA(maximum load)
Pulse output : Each channel support 5KHz pulse output
Hi-to-low/low-to-Hi
: Each channel support high to low or low to high delay
output
Isolation : Fully photo-isolation 2,000Vrms
Power requirement:
Consumption : 2.0W
Power input : 10~30VDC (unregulated)
Model: KD9052
Ethernet-based 16-ch isolated digital I/O with source type output module
Specifications
Interface:
Communication : 10/100 Based-T Ethernet
Protocol : Modbus/TCP, TCP/IP, UDP, ICMP and ARP
LED indication : LED for power and Ethernet Link status
Digital Input:
Input channels : 8
Input type : Dry contact
logic level 0: Close to ground
logic level 1: Open
Wet contact:
logic level 0: 0~10V
logic level 1: 10~30V
Counter/Frequency : Each channel support 3KHz counter/frequency input
output
Isolation : Fully photo-isolation 2,000Vrms
Digital Output:
Channels : 8
Source type : Source output up to 30V, 100mA(maximum load)
Pulse output : Each channel support 5KHz pulse output
Hi-to-low/low-to-Hi delay : Each channel support high to low or low to high delay
output
Isolation : Fully photo-isolation 2,000Vrms
Power requirement:
Consumption : 2.0W
Power input : 10~30VDC (unregulated)
Main Products:
Industrial PC, Embedded PC, Fanless Embedded System, Fanless Aluminum Embedded System, Fanless Industrial Panel PC, open frame, Fanless Single Board Computer (SBC), Fanless compact design 1U 19 Rack Mount System, Industrial Mini PC,Embedded System,Industrial Panel PC, Intel ATOM panel PC,Intel ATO
