line array manufacturers
W-5 is a line array system which is made of two 12” neodymium woofers, two 6.5” neodymium midrange speaker units,two 1.75” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy.It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two aluminum plates are set in between to eliminate its interfere. Each enclosure is equipped with rigging system,allowing flown array to be constructed rapidly and safely. W-5 is a 3-way, full range system and may be used without subwoofers for many applications. It may also be complemented by ground stacked subwoofers CVR S-218/CV-218B, which brings superb line array performance to large stadiums, big outdoor concerts and commercial events
| Model | W-5 |
|---|---|
| Type | Line array system |
| Frequency Response | 45Hz-20KHz+-3dB |
| Directivity index | 12(+-2)1.2KHz-16KHz |
| Power handing | LF 800W(RMS)1600W(PEAK) MF 300W(RMS)600W(PEAK) HF 160W(RMS)320W(PEAK) |
| Sensitivity | LF 101dB(1W@1M) MF 104dB (1W@1M) HF 111dB(1W@1M) |
| Max@S.P.L | LF 130dB(PEAK/1M) MF 129dB(PEAK/1M) HF 133dB(PEAK/1M) |
| LF section | 2* 12”(310mm) neodymium woofer 75mm(3in)coil |
| Components | |
| Nominal impedance | 16 ohm |
| MF section | 2* 6.5”(170mm) neodymium woofer 50mm(2in)coil |
| Nominal impedance | 16 ohm |
| HF section | 2*1.75” neodymium compression driver with 44mm titanium diaphragm |
| Nominal impedance | 16 ohm |
| Output section | 3-channel |
| Dispersion pattern | 110’H*7.5’V |
| Finish | Water-proof , wear-resistant textured black paint |
| Array design | Arrays of less than 3*W-5 will provide poor dispersion control and are neither recommended nor supported |
| Speaker cables | LF 1(+)1(-) MF2(+)2(-) HF3(+)3(-) |
| Rigging system | Please refer to the W-5 user manual before any operation |
| Input connectors | 2*Neutrik NL8 |
| Recommend crossover | LF 45Hz-400Hz HF 400Hz-1200Hz HF 1200Hz-20KHz |
| Dimensions | 1060*380*590mm(W*H*D) |
| Package dimensions | 1145*455*665mm/0.35cbm |
| Enclosure | Birch Plywood |
| Net weight | 54kg |
| Gross weight | 58kg |
Main Products:
professional loudspeaker, line array system, power amplifier
