HID Ballast
Product ID: SH 035, SH 070, SH 150
Digitally Controlled Ballasts for Metal Halide Vapour Lamps (HID).
- Model: SH 035
- Lamps Type: CDM-T, CDM-TD
- Wattages: 35W
- Rated Voltage: 220 ~ 240V 0/50 ~ 60Hz
- Rated Current: 0.18A
- Temperature Range: -15 ~ +50°C
- Starting Voltage: 3.5 KV
- Short-circuit Protection: Yes
- Open-circuit Safe: Yes
- Power Controlled: Yes
- Dimensions: 123 x 78 x 30.5mm
- Model: SH 070
- Lamps Type: CDM-T, CDM-TD
- Wattages: 70W
- Rated Voltage: 220 ~ 240V 0/50 ~ 60Hz
- Rated Current: 0.36A
- Temperature Range: -15 ~ +50°C
- Starting Voltage: 4.5 KV
- Short-circuit Protection: Yes
- Open-circuit Safe: Yes
- Power Controlled: Yes
- Dimensions: 123 x 78 x 30.5mm
- Model: SH 150
- Lamps Type: CDM-T, CDM-TD
- Wattages: 150W
- Rated Voltage: 220 ~ 240V 0/50 ~ 60Hz
- Rated Current: 0.7A
- Temperature Range: -15 ~ +50°C
- Starting Voltage: 4.5 KV
- Short-circuit Protection: Yes
- Open-circuit Safe: Yes
- Power Controlled: Yes
- Dimensions: 175.4 x 88 x 36mm
- SH 035, SH 070
- Non-flickering light.
- Colour stability is obtained through constancy of power.
- Increase in durability of lamps by up to 50%.
- No bothering resonances.
- Automatic disconnection in case of defective or missing lamp.
- Short-circuit safe.
- Excess temperature cut-off.
- Pulse packages produce starting energy.
- SH 150
- Digitally controlled ballasts.
- Separate starting device.
- Different LED colures signals error messages.
- Red LED glows permanently: Defective lamp.
- Red LED blinks slowly: Lamp failure during operation.
- Red LED blinks fast: Ballast was too hot when installed and has switched off.
Main Products:
Ballast & Transformer, Connectors, Wire Harness & Assembly, Thermal Protectors, Wires & Tubings
