Product ID: Scarab-E

SHDSL CPE series

If the customer require longer transmission by ADSL Modem, our Scarab-E could be a good solution.
1. You should promote SHDSL CPE by Ethernet modem to carriers, but not for end users.
2. SHDSL CPE by Ethernet modem can work with ADSL Modem but not competite with it.
3. If the carrier use ADSL modem but require longer transmission distance, SHDSL CPE by Ethernet modem is a good solution.
4. ADSL Modem only can support 1.8 KM distance if the customer rent 1.5M but SHDSL CPE by Ethernet modem can extend the longer transmission distance

Click here for details.

• SHDSL Interface
• Standards: ITU-T G.991.2, ETSI TS 101 524, ANSI T1.422 requirements
• Line code: TC-PAM
• Date rate: 192 K to 2.3M bps (increment step: 64K bps)
• Connector: RJ-11 (or, RJ-45), 135 ohm balanced via 2 wire twisted pair
• Ethernet Interface
• Standard: IEEE 802.3
• Connector: RJ-45
• Power Supply
• Local power by using external AC power adapter, 100 ~ 240V, 50 ~ 60Hz
• Remote power feeding input: 166 ~ 210 Vdc
• Consumption: less than 6Watt
• Operation Environmental Conditions
• Temperature: 0~45oC
• Humidity: Up to 90% (non-condensing)
• Mechanical Specification
• Width x Depth x Height: 205 x 120 x 25 mm

Features:

• Support EOC (embedded operation channel) for remote management
• Support SHDSL rate adaptive function and power back-off
• Support LT (Line Termination) or NT (Network Termination) mode
• Support remote power feeding function
• 10/100 Ethernet bridge

• Minimum Order: Negotiable
• TEL: 886-2-26576628
• FAX: 886-2-26576128
• E-mail: simon.wang@exartech.com.tw