Sleeve
Ceramic Split Sleeves are used in Adapters and other fiber optic components for fiber alignment to get minimal insertion loss of the transmitted light signal.
Phosphor Bronze Sleeves are an economical solution for applications where tremendous durability and repeated connect / disconnect operations are not required.
We offer several kinds of split sleeves with various Ferrules pull force requirements for Ø2.5mm OD Ferrules used for SC, FC and ST Adaptors and for Ø1.25mm OD Ferrules used for LC and MU Adaptors.
Features:
- Compliance with JIS, IEC standard
- Stable put out force
- High performance and superior durability
- Low insertion loss
Applications:
- Deigned for ST, FC, ST, LC, MU Adapter
- For singlemode and multimode
- Receptacles and Other
Specifications:
| Ceramic Split Sleeve | ||||||
|---|---|---|---|---|---|---|
| Style | Length | O.D (mm) | I.D. Tolerance (um) | Split Width | Chamfer | Pulling Force (N) |
| SC (FC) | 11.4 ±0.1 | 3.2 ±0.02 | 2.49 | 0.5±0.1 | 2 x R0.1 | 2 ~ 5.9 |
| ST | 10.1 ±0.1 | 3.2 ±0.02 | 2.49 | 0.5 ±0.1 | 2 x R0.1 | 2 ~ 5.9 |
| LC, MU | 6.8 ±0.1 | 1.62 ±0.01 | 1.246 | 0.2 ±0.1 | 2 x R0.1 | 1 ~ 2.5 |
| Phosphor Bronze Split Sleeves | ||||||
| Style | Length | O.D (mm) | I.D. Tolerance (um) | Split Width | Chamfer | Pulling Force (N) |
| SC (FC) | 11.4 ±0.1 | 3.08 | 2.48 | 0.5 ±0.1 | 2 x 0.1 + 0.1/-0 | 2 ~ 5.9 |
| ST | 10.1 ±0.1 | 3.08 | 2.48 | 0.5 ±0.1 | 2 x 0.1 + 0.1/-0 | 2 ~ 5.9 |
| LC, MU | 6.8 ±0.1 | 1.62 | 1.25 | 0.2 ±0.1 | 2 x 0.1 + 0.1/-0 | 1.98 ~ 2.96 |
Main Products:
Fiber Adapter, Fiber Connector, Fiber Optic Attenuator, Fiber Optic Coupler, Fiber Patch Cord, Optical Module, CWDM Module, DWDM, WDM Filter, Optical Isolator, Fiber Circulator, Optical Switch, PLC Splitter, Fiber Collimator, Ceramic Ferrule, Fan Out Cable, Mode Condition Cable, Optical Filter