Product ID: 07

Cable Gland

Jing Gi Enterprise Inc. a qualified for Cable Gland especially for allproducts com ee jinggi manufacture of Cable Terminal, Stainless Tie and Cable Gland . It is professional on global B2B trading with Cable Gland, Cable Terminal, Stainless Tie, Cable Gland and Strap Tie since .

The cable gland can offer a coordinated assortment for a wide range of applications, including control units and some hazardous areas which should be screwed directly into the housing or utilizing a locknut .

Full assembly instructions are supplied with cable glands, the instructions must be read prior to installation. When used to terminate unarmoured cable gland , the gland is suitable only for fixed installations. The cable must be clamped near the gland to prevent pulling and twisting. Where E8XF type glands are fitted into non-metallic increased safety enclosures they must be included within the earth circuit of the system.

Some of the cable gland provide a seal on the inner sheath and a universal armour clamp for steel wire, steel tape , screened or braided cable, while some of the other type of cable gland provide pull resistant seals on the inner and outer sheath and a braid armour clamp. The armour clamp indicates above provides an electrical bond between the cable armour and the gland. The cable gland maintains flameproof and increased safety exe methods of explosion protection and IP66.

The cable gland maintains flameproof integrity when used with cable that has a suitable profile and is compact with extruded bedding. The cable gland shall be deemed to be effectively filled.

Every cable gland approved by designed standard such as En 50014:1998, En 50018:2000 , which is certified by appropriated authorization of shipping countries, should be labeled with suitable marking. For flameproof applications ,the female thread into which the gland is to be fitted must comply with clause 5.3 of EN 50018:2000 ( Clause 5.3 IEC 79-1) and an engagement of at least 5 full threads must be achieved for parallel threads and should be achieved for tapered threads.

Please also see our hot products as below:


cable terminal
stainless tie
cable gland
strap tie
cable tie

Click here for details.

• Material: Nylon plastic.
• Hermetic seal: Nitrile rubber.
• Protection degree: IP67-5 pressure (rotate position with O-seal).
• Ambient temperature: Quiescent state -40°C to 100°C, short time to 120°C, dynamic -20°C to 80°C, short time to 100°C.
• Supply color: Grey, black, other color, please inquiring.

• Minimum Order: Negotiable
• TEL: 886-4-25670996
• FAX: 886-4-25669485
• E-mail: service@jing-gi.com