The strap tie provides nail slots for easy installation and coined edges; it can be cut to length. CS is continuous utility straps which can be cut to length on the job site.
Wood shrinkage after strap installation across horizontal wood members may cause the strap tie to buckle outward. User should refer to the applicable code for minimum nail penetration and minimum wood edge and end distances. The cut length of the strap tie shall be equal to twice the "End Length" noted in the table plus the clear span dimension. Use every other triangle hole if the wood tends to split. Use round and triangle holes for comparable MST loads, providing wood does not tend to split.
The strap tie is designed and tested to provide specified design loads. To obtain optimal performance from the strap tie and to achieve maximum allowable design load, the strap tie must be properly installed and used in accordance with the installation instructions and design limitations. Failure to follow fully all of the notes and instructions provided by the manufacturer may result in improper installation of products. Improperly installed the strap tie may not perform to the specifications set forth and may reduce a structure's ability to resist the movement, stress, and loading that occurs from gravity loads as well as impact events such as earthquakes and high velocity winds.
The strap tie are available with nylon and polypropylene strap in wide range of lengths to provide a rust proof and non-damaging alternative to metal cam buckles for indoors or outdoors purpose. The strap tie is available in several quantity and color options ,which provides a convenient handle for the hanging and carrying of secured objects while also providing a secure method for attaching the tie-down straps (via a pass around loop connection) to an object such as a roof rack bar or fence post.
.The strap tie can also be used to join two items together in applications where extra length may be required. The strap tie is far stronger, slip-proof, and more secure than competing plastic fastener products that tend to easily slip with load shifts or release with accidental contact, and unlike metal cams, the strap tie will not rust, scratch, mar, or otherwise cause damage to property and the nylon strap versions are machine-washable for years of use..
Please also see our hot products as below:
cable terminal stainless tie cable gland strap tie cable tie
- All nylon one-piece construction-up to 175 lbs (79.4kgs) min. loop tensile strength.
- Operating temperature: 0˘XC to 85˘XC (32˘XF to 185˘XF).
- Heat material could reach 120˘XC.
Specifications:
- UL approved, UV, Hat Ristant.
- Color are available.
- Material: Nylon 66 94V-2.
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-25670996
- FAX: 886-4-25669485
- E-mail: service@jing-gi.com