Back to allproducts.com Back to allproducts.com
Searching products in allproducts.com:
Free to Submit Your Products | Trade Leads | Sourcing Requirement | Help
 
Home > Products > Electrical and Electronics > Test & Measuring Instruments > Measuring & Analysis Instrument > Logic Analyzers
Navigation
Company
Showroom
Inquiry

LINEEYE Co., Ltd.

Print this page Send an inquiry
Product  

Product ID: LE-7000

Multi Protocol Analyzer

Supports Max. 1.54Mbps, High-performance portable communications analyzer.
The LE-7000 is that kind of equipment having been built with the multiple protocol analysis technology and miniaturization developed with the long proven LINE EYE series and high-speed user-set baud rate support.
It comes standard with all the functions of an expensive heavy-duty grade analyzer, but it is packed into a compact B5 sized 1kg body and driven by battery power.
The LE-7000 is a necessary tool for stepping into the IT age, as it can be used for everything from development and testing of communications systems and equipment to communications network maintenance.



 Multi Protocol Analyzer(LE-7000)

Click here for details.

Specifications:
  • Supports RS-232C and RS-422/485.
  • Supports Max. 1.54Mbps communications.
  • Max. 2.048Mbps BEAT.
  • High-capacity 3.6MB capture buffer.
  • User-set baud rate setting.
  • Error interrupt simulation.
  • Sequential trigger.

Interface Standard RS-232C (V.24), RS-422 / 485 (X.20/21) (Standard) 3V / 5V TTL (Optional).
Protocol Asynchronous: ASYNC Character synchronous: SYNC, BSC, (NRZ/NRZI) Bit-oriented synchronous: HDLC, SDLC, X.25 (NRZ/NRZI).
Speed Max. 1.54Mbps in all protocols (Max. 2,048Mbps in BERT).
Internal clock (bps) Pre-set: 110, 1200, 9600, 19.2K, 38.4K, 57.6K, 64K, 115.2K, 128K, 230.4K, 256K, 460.8K, 512K, 921.6K, 1.5M USER-set: 50-2.048Mbps (4 significant digits) Can be set for SD(TXD) and RD(RXD) independently.
Data Code ACSII, EBCDIC, JIS7, JIS8, Baudot, Transcode, IPARS, EBCD, EBCDIK, HEX.
Character Framing ASYNC: Data bit (5/6/7/8) + parity bit (0/1) + stop bit (1/2) SYNC, BSC: Data bit + parity bit (total 6,8 bits) HDLC, SDLC, X.25 : Data bit + parity bit (total 8 bits).
Parity Bit None, odd even, mark, space, MP (Multi-processor bit).
Bit Transmission Order LSB first and MSB first, selectable.
Polarity Inversion Normal and inverted, selectable.
Error Check Parity (odd, even, mark, space), framing, abort, short frame BCC (LRC, CRC-6, CRC-12, CRC-16, CRC-ITU-T).
Memory capacity Capture memory for monitor: 3.6M bytes (1.8M characters) One area or two divided areas, selectable Ring buffer or fixed size buffer, selectable Simulation transmission data memory: 32K bytes (16K characters) Divisible into a maximum of 16 types. Part of data can be registered as error data.
Monitor Function Handles half-duplex and full-duplex communications. Idle time display (max. 999.9 s; resolution: 1ms, 10ms, 100ms), Time stamp display (day/hour/min., hour/ min./sec. or min./sec./10ms) Lead Status display (RS/ C, CS/ I, ER, DR, CD, SQD, CI and EXIN).
Other display function Display pause; Bit shift display in SYNC; Jump to the specified screen.
Protocol translation display HDLC (LAPB, LAPD), ITU-T X.25 (frame, packet), BSC.
Lead status LEDs V.24: SD, RD, RS, CS, ER, DR, CD, SQD, CI, ST1, ST2, RT X.20/21: T, R, C, I, S.
Data search function Search data from capture memory and displays / counts them. Data frame up to 8 characters ("don't care" and "bit masking" assignable) Idle time not less than preset value Time stamp data ("don't dare" and bit masking assignable) error(parity, framing BCC, break / abort, short frame assignable) Trigger point.
Auto Configuration Measurement conditions such as protocol, transmission speed (max. 230.4Kbps), data code, synchronous character and BCC check can be set.
Auto run / stop function Start and stop time of various measurement tests can be specified.
Delay Time Measurement Measures the time between interface leads changes (0.1 ms resolution).
Timer / Counter Interval timer: 2 kinds (Max. 999999; resolution 100ms, 10ms or 1ms), Universal counter: 2 kinds (Max. 999999), Counter for SD and RD characters (Max. 4294967295).
Statistical analysis function Statistics (no. of exchanged characters, no. of frames, no. of satisfied trigger conditions) are collected and displayed in graphs on 10 minutes / 1hour / 4 hours basis.
Trigger Function Four pairs of Trigger condition and Trigger action to be taken. Trigger condition data frame up to 8 characters ("don't care" and "bit masking" assignable), Idle time not less than preset value, Error, MP, Timer/Counter value matching, interface lead transitions, External trigger input. Trigger action Stop measurement test (offset assignable), Enable trigger condition, Timer control (start/stop/restart), Counter control (count/clear), buzzer, External signal output, Save monitor data onto memory card, Send preset characters (for manual mode simulation).
BERT (Bit error rate test) Error rate measurement test in accordance with ITU-T G.821. (DTE / DCE pin assignments selectable) Pattern: 63, 511, 2047, mark, space (error bit insertion enabled with key operation) Measurement range : Bit and block error (0-9999999-9.99E9), bit error rate, block error rate, SYNC loss frequency, Savail, %EFS.
Simulation Functions Transmission test for all kinds of data including error data. DTE/DCE pin assignments selectable. Can preset change in interface lead and transmission timing.
Manual mode View communications on display and send data assigned to keys by key operation. Send data when events are established using trigger feature.
Buffer transmission mode Select and resend SD or RD data in capture memory for monitor.
Program mode Supports multiple protocols using command-based simulation; Commands: 36; steps: Max. 512 4 set; Transmission data string: Max. 16KB; Controls communications lines using commands.
Display Monochrome LCD with back-light (Max. 30 characters 8 lines).
Memory card interface Accommodates 16MB/64MB flash memory card: Used to save/load setting condition and simulation data / programs (up to 100 files).
External serial interface (AUX port) RS-232C (mini DIN 8-pin): Up to 230.4Kbps Used to input/output setting condition and monitor data from/to external devices, and to update the system ROM.
Printer interface Parallel (14-pin female) or RS-232C (mini DIN 8-pin), selectable; Hard copy and printing monitor data on continuous format.
Power supply Built-in rechargeable battery (Appox. 4 hours of operation) AC adapter: Input AC100-240V / Output DC9V 1.4.
Dimensions/weight 39 (H), 240 (W), 180(D)mm, approx.1kg.
Environmental requirement Temperature range: 0 to 40 degrees centigrade (operating); -10 to 50 degrees centigrade (storage) Humidity: 90%RH or below (no condensation).
Accessories Interface sub-board A (RS-232C/RS-422, 485) : 1 (already mounted); Cables (RS-232C / V.24 monitor, X.20 / 21 monitor, external signal I/O, serial AUX) : 1 each; AC adapter : 1 Carrying bag: 1; PC software(DOS program) FD : 1; Instruction manual : 1.

Main Product:
Multi Protocol Analyzer   USB Protocol Analyzer  

Ordering information:
  • Minimum Order: Negotiable

You may be interested products: