| Standard |
USB 1.1 |
| Connector |
USB standards A, B Receptacle. |
| Speed |
FULL (12Mbps) / LOW(1.5Mbps)Automatic identification, Automatic switch. |
| Data logging |
Logs by the byte including Sync pattern. USB device state(RESET, SUSPEND, RESUME etc.) can not be logged. |
| Log size |
LE-600S unit: 128Kbyte, PC : Max.2Gbyte. |
| Connector |
Parallel port DB25pin (Female) in aaccordance with IEEE1284ECP or EPP+ECP mode. |
| LED display |
PWR(Power):1, OVR(Overflow):1, EMP(Empty):1, FULL SPEED:1. |
| Switch |
PWR(power):1, RESET(reset):1. |
| Packet |
SOF, IN, OUT, SETUP, DATA0, DATA1, ACK, NAK, STALL, PRE or Unknown. |
| Translation display |
Displays standard request and request descripter. |
| Error check |
CRC Error. |
| Color display |
Defines color of SOF, IN, OUT, SETUP, DATA0, DATA1, ACK, NAK, STALL, PRE or Unknown, Setup Detail, CRC-Error. |
| Filter |
Displays or not SOF, PRE, NAK, Specific address, Specific endpoint. |
| Retrieval function |
SOF, IN-Token, OUT-Token, SETUP-Token, DATA-Packet (A data string can be up to 64 bytes), ACK, NAK, STALL, PRE, Unknown, CRC-Error "Capable of retrieving specific address and specific endpoint" |
| Mark jump |
Puts marks on specific transaction up to 99 while receiving log data and jumps to the marked point immediately. |
| Preservation |
Saves log data in text format "Capable of copying and pasting log data via the clipboard". |
| Printout |
Monochrome/Color |
| Power supply |
DC9V 400mA AC adapter AC100 to 240V(50/60Hz). |
| Max. Watts |
3.6W max. |
| Ambient temperature and humidity |
Temperature range : 0 to 40°C (operating) ; -10 to 50°C (storage) Humidity: 10 to 90% (no condensation). |
| Dimensions/weight |
130(W), 145(D), 38(H)mm, 300g. |
| Accessories |
USB analyzer, analysis software, AC adapter, Parallel cable, USB cable. |
