LINEEYE Co., Ltd.

Send an inquiry
USB2.0 protocol analyzer

Product ID: LE-620HS-E

LE-620HS-E is a USB2.0 protocol analyzer which connects with a PC, and analyzes "USB Protocol." This model continuously records USB2.0/1.1 data on the hard disk of PC in real time, and those data are displayed intelligibly on the PC screen.

Features:
  • HIGH/FULL/LOW Speed Modes Automatic Identification
  • Continuously Record up to a Max,20Gbyte
  • Intelligible Display
  • Highly Accurata Time Stamp Function
  • Real-time Filter
  • Powerful Sequential Trigger
  • Upgraded Off-Line Analysis Capability
  • Statistical Infomation Function
  • Practical Use of Measurement Data

Standard USB 2.0/1.1
Connector USB standard A,B Receptacle
PC connection connector USB Receptacle. It connects to the USB port of PC which installed attached analysis software.
Speed HIGH(480Mbps) / FULL(12Mbps) / LOW (1.5Mbps) Automatic identification, Automatic switch
Log size LE-620HS-E unit: 256Mbyte. PC: MAX. 20Gbyte
Data logging Log by the byte including Sync pattern. It records on the LE-620HS-E capture memory and the PC hard disk.
LED display PWR(Power):1, RDY(Ready):1, Hi,(High speed):1, Full(Full speed):1, Low(Low speed):1. Suspend:1, Reset:1, Data(Data for measurement):1, RUN(Under measurement):1.
Display packet SOF, IN, OUT, SETUP, DATA0, DATA1, ACK, NAK, STALL, PRE.DATA2, PING, MDATA, SPLIT, ERR, NYET, Unknown
Error check CRC error
Time Stamp Function(Elapsed time recording display) Resolution 16.7nsec. for Max. 5 hours. Time stamp in the off setting: Time unit for USB (micro) frame 125usec./1msec
Color display Customize Defines color of SOF, IN, OUT, SETUP, DATA0, DATA1, ACK, NAK, STALL, DATA2, PING, MDATA, SPLIT, ERR, NYET, Unknown, SetupDetail, CRC-Error
Translation display Can display the following in detail: standard request, HUB/HID/Audio/Communication/Printer/USBTMC class-specific device requests, standard descriptor, HUB/HID/Audio/Communication/Mass storage(SCSI Command Parents Set、ATAPI SFF-8070i)/Printer/USBTMC class-descriptors.
Filter function Real time filter : Record or not record NAK, specific address, and specific end point. Display filter : Display or hide SOF, NAK, SETUP, specific address, specific end point.
Trigger Condition: Particular address/end points, packet types (TOKEN and HAND SHAKE packets in combination), errors (bit stuffing, CRC, and PID errors), data packets (8 bytes max, hexadecimal/decimal/binary input or character train input, with or without bit mask specification), and external trigger (edge or level specification possible). Action: Possible to specify 16 actions enabled with log start, log stop, and external trigger output (with or without levels or pulses specified) in combination with conditions. External: 8-point external trigger input and 8-point external trigger output. Connector: 20-pin male (OMRON's XG4C-2034 or equivalent one). Electrical specifications: LVTTL
Search function SOF, IN-Token, OUT-Token, SETUP-Token, DATA-Packet, PING, ACK, NAK, STALL, NYET, Unknown, CRC-Error, Specific address, Specific endpoint, Longer non-communication period than specified time
Statistical information function Display by totaling the number of transactions, transfer bytes, and the average transfer rate within measured data. Can use the data results with the spreadsheet applications.
Mark/Jump Puts marks on specific transaction up to 99 while receiving log data and jumps to the marked point immediately.
Save Log data, Text format, comma separated value format (CSV), Copy / paste via a clip board, can add a comment to the saved data.
Power supply AC100 to 240V (50/60Hz) MAX.10W
Ambient temperature Operating: 5 to +40 degrees, Storage: -10 to +50 degrees
Regulatory approvals CE (EMI : Class A)
Humidity 10 to 90% (no condensation)
Dimensions/weight 145 (W) x 190 (D) x 45(H) mm, 950g

Main Products:
Multi Protocol Analyzer, USB Protocol Analyzer, LAN Analyzer

Send an inquiry

Contact Details

Sales Contact: Ms. Fujii
Minimum Order:Negotiable
Address:39-1, Karahashi, Nishihiragaki-cho, Minami-ku Kyoto, 601-8468 Japan
Tel:81-75-693-0161
Fax:81-75-693-0163