Pneumatic - Swing Clamp Cylinders
Product ID: MTA*
Note:
•Please don't exceed 1.5 times of the original length, if it is necessary to increase the length of the clamping arm
•Suggested to install a flow control valve protect cylinder barrel and internal components against fretting wear
- MTAS
- Single side clamping arm
- MTAD
- Double sides clmaping arm
- MTAS.. M
- Single side clamping arm (Piston with magnet)
- MTAD..M
- Double sides clamping arm (Piston with magnet)
- MTAS..FC
- Single side clamping arm (Manifold with flow control
- MTAD..FC
- Double side clamping arm (Manifold with flow control)
- MTAS..FA
- Single side clamping arm (Flange type)
- MTAD..FA
- Double sides clamping arm (Flange type)
- These swing clamps are used when it is required to keep the fixture workpiece area free of straps and clamping components for unrestricted workpiece loading and un-loading
- This pneumatic clamping element is a pull type cylinder. There are five standard sizes, and for each size two versions of standard clamping arms, mounting of these clamping arms at any angle within 360
| Model | MTAS | MTAD |
|---|---|---|
| Acting Type | Double Acting | Double Acting |
| Tube I.D. (mm) | 25, 32, 40, 50, 63 | 32, 40, 50, 63 |
| Power Fluid | Filtered air with or without lubrication | Filtered air with or without lubrication |
| Range of Pressure | 1~10.3 kgf/cm² | 1~10.3 kgf/cm² |
| Max. Pressure | 14.7 kgf/cm² | 14.7 kgf/cm² |
| Material of Cylinder Barrel | anodised aluminum alloy | anodised aluminum alloy |
| Standard Angle of Rotation | 90° ±2° (Angle of 0°, 45°, and 60° are optional) | 90° ±2° (Angle of 0°, 45°, and 60° are optional) |
| Rotating Direction | Clockwise or Counter Clockwise | Clockwise or Counter Clockwise |
| Sensor Switch | LN40R | LN40R |
Main Products:
Pneumatics, Pneumatic Valve, Pneumatic Cylinder, Pneumatic F.R.L, Pneumatic Equipment & Components, Solenoid Valves, Air Preparation, Air Cylinders, Fittings, PU tubing, Hydraulic Cylinders, Other Accessories
Related Products
Contact Details
CEO: Mr. Ching-Chen Huang
Sales Contact: Vice President Mr. Andrew Huang
Minimum Order:Negotiable
Address:No.106, Sec. 3, Cheng Te Road Taipei, 103 Taiwan
Tel:886-2-25914100
Fax:886-2-25957633, 25975522
E-mail:
mindman@mindman.com.tw