Minsun Technology Co., Ltd.

Send an inquiry
Three-Phase Voltage and Ampere Meter

Product ID: MSDP-883

Three-Phase Voltage and Ampere Meter

Three-Phase Voltage and Ampere Meter

MSDP883 is the leading electric meter, which is entering into a new era of digitalization and which will meet the requirements of a new generation of users. Having a high degree of application flexibility, including features of clearness and easy reading, the easy multifunctional operation and the added value of upgrading the performance of the entire system, it fully shows the advantages of digitalization as a future trend.

Features:
  • Simultaneously Display 3-Phase Voltage and 3-Phase Current:
    • Collectively display data via a large LED without the selection of the traditional VS , AS , and Δ or Y voltage via the front panel and single-key select.
  • Various Protective Functions:
    • They include Phase-lack protection, over-current protection, over-voltage protection and under-voltage protection. There are two relay outputs, a contact a or b output, and an on/off relay delay, which can be set from 0- 999 seconds.
  • Simple and Easy Installation:
    • CT/PT value, protective functions, etc. are set directly from the front panel; after setup, they cannot be changed except via a certain procedure so as to avoid non-technical personnel from changing them erroneously.
  • To Save Working Time:
    • With its simple wiring, short work time, there is no need for the addition of the traditional VS , AS .
  • Applicable to Any System:
    • Current Range: 0- 6,000A; Voltage Range: 0- 510 V/KV; Three-phase three-wire / Three-phase four-wire systems are suitable. It may also help to decrease stock and facilitate management.

Item Description
Power Source 110V, 220V, 380V, 440V ±10% <15VA Max.> Frequency Range: 50-60HZ
Input Current 0-5A , Display Range: 0-6000A
Input Voltage 0-510V , Display Range: 0-999V/KV
Output Contact 2-Contact output, Capacity: AC220V / DC30V 5A, Mechanical Life: 20 million times
Tolerance Temperature: -10 ~ 60°C, Humidity: 0~ 90%
Dimension Exterior: 144 x 144mm, Panel Cut Out: 138 x 138mm, Depth: 108.5mm DIN 43 700
Accuracy Volt Meter: ± 0.2%F. S., Ampere Meter: ± 0.2% F. S.

Main Products:
Electric Meter, Plating Equipment, Galvanizing Equipment, Electric Demand Control, Electric Power Meter, Multi-Function Power meter, Kilowatt Hour Meter, Power Factor Regulator, Multi-functional Electric Converter, Four Section Demand Controller, Distributed / High Performance Demand Control System,

Send an inquiry

Contact Details

Minimum Order:Negotiable
Address:No.15, Lane 210, Jeanshin St. Shulin City Taipei Hsien, Taiwan
Tel:886-2-2689-4051~2
Fax:886-2-2688-0109