HA3035 is an on-line type of access control reader which complete professional feature with lower cost reader. It is designed for general applications and easy to manipulate and install.
Specifications:
- Serial Porter: TCP / IP, RS232, RS485.
- Reader Module Type: EM. HID. MIFARE. TI option.
- Reader Type: Proximity.
- Reader Range: Up to 10cm with EM compatible card 125Khz.
- Display: 16 characters x 2 lines LCD with backlight.
- Battery Capacity: Timer IC and data maintained upto two months after power failure.
- Memory Buffer: 3,000 cardholders / 3,500 transactions.
- Keypad: 12 key (0-9, X, #).
- Indicator: Bi-color LED (green / red).
- Case Material: ABS (UL 94V-0).
- Dimension: 150 (H) x 110 (W) x 45 (D) mm.
- Weight: 380g.
- Working Voltage: DC 10-15 volt.
- Power Consumption: 300mA max. @12VDC.
- Operating Temperature: 0°C - 50°C.
- Humidity: 5°C - 95°C (no condensation).
Features:
- Proximity type reader, reader range upto 10cm.
- 3,000 card holders / 3,500 transactions.
- Network configuration upto 99 devices.
- Anti-pass back.
- Access mode available.
- Door left open alarm function.
- Force entry alarm.
- Temporary suspend all function.
- Password time zone restraint.
- Ten access time zone restraint.
- Twelve months holiday restraint.
- Access mode selectable
- Reading proximity card.
- Card data + personal password.
- Keyin card data.
- Communication interface: RS232 and RS485 TCP / IP available.
- Can be used as stand alone device without personal computer connected.
- Eight groups personal password time zone programmable.
- password time zone programmable if card data with password access selected, for example: Use card data in regular time, card data with password in holiday.
- Two types alarm status available
- Force entry.
- Door not close within a pre-defined time.
- Device model and version number can be displayed.
- Card number shown when access succeed.
- Up to 2 months battery back-up capacity for data storage during power failure.
- With power saver function, the back light of LED turn off once no there is operation within 3 minutes.
- The acting time of electric strike, alarm function anti-duress and door not closed alarm can be programmable from 1 to 255 seconds.
- The way to deactivate the alarm when door not close within a predefined time.
- Communication baud rate can be programmed via keypad.
- Four error message available (all records are stored in controlled software).
- Invalid card.
- Restricted time.
- Time zone unmatched.
- Code unmatched.
- Minimum Order: 20pcs. set
- TEL: 886-2-25215815
- FAX: 886-2-25210279 / 25235220
- E-mail: sales@secunic.com, grace@secunic.com
Certificate:
CE, IEC 529, IP34