Thyristor Power Regulator , power controller - Single phase angle control
W5-SP4V045-24J
Single phase angle control
Main power voltage: 1 phase 200-480VAC
Rated current: 45A
Auxiliary power source: 1 phase 220VAC
Input signal: 4~20 mA
Buffering time: Adjustable buffering time, 1~22 seconds
*Independent adjustment of Max and BIAS.
*Down-opened Panel, easy for fuse replacement.
*VR of Max and SFS are installed in the front panel, easy for adjustment.
*Multi-LED display panel makes the operating condition clear.
*The auxiliary powers(AC1,AC2) are independently controlled for all models.
*Build-in buffering output adjustment(SFS VR), adjusting range 1~22 seconds.(Only for the phase control product).
*Main power is one spec. Design for 200~480VAC.
*Automatic power frequency detection for 50~60Hz. No need for selection or switch.
*Automatic detection and display for power out of phase, SCR overheating, and fuse burn-down with one set of alarm dry contact output.
*In cases of SCR overheating or fuse burn-down, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse burn-down.
*4~20mA,1~5VDC,2~10VDC,0~20Ma,0~5VDC,0~10VDC, dry contact points, etc. and all control signals are ready to use.
*Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions.
*Using European detachable control signal connector for easy replacement without re-wiring installation.
Main Products:
THYRISTOR POWER REGULATOR & SOLID STATE RELAY
