Product ID: BT-SH5245-200

RO Booster Pumps for 100 GPD

RO Booster Pumps are used in applications where the normal system pressure is low and needs to be increased. Priming introduces fluid into the pumping chamber to create the pressure differential needed for pumping at a rated service. Self-priming pumps create and maintain a sufficient vacuum level to draw fluid into an inlet with no external assistance. Typically, booster pumps are used in water systems or applications that have low contamination. They have a variety of commercial, municipal, and military applications and are used in a range of industries that includes aerospace, mining, and food processing.
Reverse Osmosis Booster Pumps low voltage pump is designed to operate continuously at near constant pressure until the product water tank is full. The output pressure is dependent on the reverse osmosis system's total flow requirement, feed water pressure and available power source. These booster pumps are to be installed on the raw water line feeding the RO unit. If you have low water pressure on the raw water line feeding the RO unit, ..... this booster pump will increase your water pressure so the RO unit will make RO water at a faster rate, for storage in the RO tank.
These Booster pumps will aid your RO system in producing water to it's full capacity. These pumps will reduce waste water considerably and pay for themselves within weeks
This Pump Requires A Transformer And Pressure Switch to Operate Properly! This Item is The Pump Only! No Transformer Or Tank Pressure Switch is Included.

Click here for details.

Features:

• WITH TRANSFORMER:
• INPUT:AC110V/60HZ OR 230V/50HZ
• OUTPUT:DC12V/10A
• INLET¡§0¡¨:BY PASS 150 PSI
• PRIME:Self-priming up to 2~3 meter
• N.W.:2.3Kg

• Minimum Order: Negotiable
• TEL: 886-4-23917899
• FAX: 886-4-25605233
• E-mail: boost@boostersys.com