Product ID: BT-LST-6000G

Commercial Reverse Osmosis System-6000G

LST-6000G Series Reverse Osmosis Systems are designed for commercial and industrial applications of average flow rate. The flow rate is a available from 1,500 ~ 12,000GPD with custom-made functions. They have been widely used in electronics, Electro-painting, food, bottle water industrial and etc.

- Electro-polished, seamless SUS high-pressure RO housing.
- Multi-staged booster pump, SUS.
- Cartridge per-filter 1 or 5 um with stainless steel housing.
- Metered control system :
- Automatic operation.
- Periodically automatic membrane flush.
- Clean-In-Place unit.
- Safety protection on pumps.
- Permeate and reject indicators.
- Safety protection on booster pump at low influent pressure.
- Operation stopped at high permeates level in storage tank.
- Custom made design-PLC, User interface or conventional control.

Click here for details.

• Feed water temperature: (Fahrenheit)85deg . maximum.
• Feed water pressure: 35 psi minimum / 85 psi maximum.
• PH range: 4 - 12.
• Turbidity - must be removed.
• Iron: maximum tolerance 0.5 ppm (dissolved only).
• Hardness: over 10 gpg should be softened.
• Hydrogen sulfide: 98% nominal.
• Electrical:
• 110V, 60 HZ (50 HZ available on request)
• 220-440V, 60HZ (50 HZ available on request).
• Test conditions:
• Operating pressure 200 psi
• design temperature: (Fahrenheit)77deg . (25deg )
• membranes: Thin film composite

Features:

• Stainless steel frame.
• TFC membranes.
• Stainless steel R.O. membrane vessels.
• High pressure pump.
• PLC controls.
• Power on / off switch.
• 5 microns pre-filter.
• Product water flow meter.
• High pressure gauge.
• Low pressure switch.
• Level control on / off.
• Automatic flush.
• Light vertical multi-step centrifugal pump.
• NOTE:
• Pre-treatment is required. Available 110V/60Hz and 220V/50Hz. Standard wooden crate package.

• Minimum Order: Negotiable
• TEL: 886-4-23917899
• FAX: 886-4-25630726
• E-mail: boost@boostersys.com