RO Booster Pumps for 100 GPD
RO Booster Pumps For is for a 70~100 PSI pump with a 100 GPD capacity.
N.W.:1.8 Kg
transformer: input:ac110V/60HZ or 230V/50HZ
output:dc24V/1.2A
inlet"0":by pass 110 PSI
prime:Self-priming up to 2~3 meter
this pump requires a transformer and pressure switch to operate properly! this item is the pump only! no transformer or tank pressure switch is included.
This low voltage booster pump is designed to operate continuously at near constant pressure until the product water tank is full.
The output pressure is dependent on the reverse osmosis system's total flow requirement, These booster pumps are to be installed on the raw water line feeding the RO unit.
If you have low water pressure on the raw water line feeding the RO unit,this booster pump will increase your water pressure so the RO unit will make RO water at a faster rate, for storage in the RO tank. The absolute rule of reverse osmosis purification is, the more PSI the better the flow and recharge rate, and the better the rejection rate.
- WITH TRANSFORMER:
- INPUT:AC110V/60HZ OR 230V/50HZ
- OUTPUT:DC24V/1.2A
- INLET“0”:BY PASS 110 PSI
- PRIME:Self-priming up to 2~3 meter
- N.W.:1.8 Kg
| Model | Voltage | Pressure | power | Ports NPT(Inch ) |
|---|---|---|---|---|
| SH-5325-70 | DC 24V | 70~100PSI | 100 GPD | 18NPT (3/8) |
Main Products:
Commercial & Industrial water pressure booster pump,Packaged Pumping Systems,RO Booster Pumps,wastewater pump,Sump Pump,Ro booster pumps
