Product ID: BT-RO-50AC

Auto Flushing Reverse Osmosis System

Auto Flushing Reverse Osmosis System with Booster Pump Detailed Product Description:
Basic unit, used when mains water pressure is 75 to 100 psi
Use a booster pump with pressure under 75psi, and fit a pressure reducing valve if the pressure is over 100psi
Booster pump unit if you have a low mains pressure
Permeate pump unit if you wish to improve filter efficiency
Permeate pump and booster pump, for low pressure water supplies
Built-in the self-cleaning procedure, so the membrane remains clean. Water never stands still for a longer time to avoid bacteria growing. Let all of your customers can enjoy the best water quality.
RO units treat the water by filtering it though a membrane similar to a polythene sheet. Around 25% of all the water treated will go through the membrane and approx 75% will go to waste along with all of the contaminants contained in the water. However as the water storage tank fills, a back pressure is applied to the RO membrane and this reduces the efficiency of the membrane. In order to compensate, a permeate pump can be used with our standard unit.

Click here for details.

• Storage tank: 3.2 gallons steel tank
• Faucet & installation kit included
• Dimension: D21x W50 xH52 cm
• Weight: 8kgs/12kgs

Features:

• Automatic shut-off valve
• Low-Pressure Switch
• Low/High Pressure cut-off Solenoid Valve
• Post Activated Carbon filter
• R.O. Membrane
• Drain saddle valve.
• Four color coded 1/4 inch tubing for system connection.
• Flow restrictor, stainless steel check valve.
• IC Control Box.
• European design attractive faucet.
• Feed water connector & deliver valve.
• Completely assembled & water leaking testing.
• 100% factory tested and sterilized ready for installation.
• Installation instruction.

• Minimum Order: Negotiable
• TEL: 886-4-23917899
• FAX: 886-4-25605233
• E-mail: boost@boostersys.com