RO Booster Pumps For is for a 70~100 PSI pump with a 300 GPD capacity. N.W.:2.3 Kg transformer: input:ac110V/60HZ or 230V/50HZ output:dc24V/2A inlet"0":by pass 130 PSI prime:Self-priming up to 2~3 meter this pump requires a transformer and pressure switch to operate properly! this item is the pump only! no transformer or tank pressure switch is included. This low voltage booster pump is designed to operate continuously at near constant pressure until the product water tank is full. The output pressure is dependent on the reverse osmosis system's total flow requirement, These booster pumps are to be installed on the raw water line feeding the RO unit. If you have low water pressure on the raw water line feeding the RO unit,this booster pump will increase your water pressure so the RO unit will make RO water at a faster rate, for storage in the RO tank. The absolute rule of reverse osmosis purification is, the more PSI the better the flow and recharge rate, and the better the rejection rate.
Specifications:
Features:
- WITH TRANSFORMER:
- INPUT:AC110V/60HZ OR 230V/50HZ
- OUTPUT:DC 24V/2A
- INLETˇ§0ˇ¨:BY PASS 130 PSI
- PRIME:Self-priming up to 2~3 meter
- N.W.:2.3 Kg
Others:
| Model | Voltage | Pressure | power | Ports NPT(Inch ) |
| SH-5345-300 | DC 24V | 70~100PSI | 300 GPD | 18NPT (3/8) |
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-23917899
- FAX: 886-4-25630726
- E-mail: boost@boostersys.com