Photo Etched Soft Enamel
Product ID: 05
Photo etched process is transferring the design from a photographic negative onto the metal surface by sensitization process. Then acid was applied to etched out the designs. It is recommended to select bolder designs to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will required an additional screen printing process. Coloring are done by soft enamel. A clear epoxy dome can be added to enhance the effect. PMS colors can be matched. This process requires a surrounding metal edge to ensure painting results, so it is usually necessary to reserve a metal edge of minimum 0.8mm.
Main Products:
metal lapel pins, key chains, tie bars, cuff links
Contact Details
CEO: Mr. Mark Kao
Sales Contact: Sales Manager Emma Chao
Minimum Order:Negotiable
Address:512, 3F Chung Cheng Road, Hsin-Tien Taipei Hsien, 231 Taiwan, R.O.C.
Tel:886-2-22182828
Fax:886-2-22183450
E-mail:
customerservice@k-pro.com.tw