SEARCH LIGHT TAIWAN CORP.

Igniter Socket

• The Merits (advantage) of D1 Bulb
• Originally the HID system of high power generator and HID bulb transit electrify through high power line, therefore much of the electrify parameter is lost, furthermore the high power line can cause serious damage when accident occurs.
  
• D1 bulb let High-pressured producer and HID bulb made as a whole, no need of high power line for transit, decreasing the danger, also the EMI causing by high voltage is removed.
• There is no distance between high power ware and bulb, lighting the bulb by direct transiting of high voltage, very reliable in use, no doubts about safety.
• Reliability and safety
• HID aerification needs 23000v high voltage to active output discharge, and to active 23000v high voltage inquires high power line and special resist lamp holder. D1 is placed directly on top of high power box, so the lost of electricity between high power line and lamp holder is reduced, it increase the electrify safety and ensures the common uses.
  
• EMI
• Due to the uncomplex design, connection between high power line and connector is removed, the interference of EMI is removed.
  
• Size and Weight
• Due to the design that High-pressured producer and bulb are made as a whole, space between high power line and connector is saved. Now closer attached to the HID ballast.
• Moreover, 3 pin input voltage is placed in D1 bulb to reduce the size, it is easier to be set.
  
• Reduce of cost
• Due to good design, the cost waste might cause by bad effects of EMI between high power line and connector is avoided. Moreover it is separable-designed letting the bulb singly be replaced when consumed. The High-pressured producer remains, which lowers the cost great amount.
  
• Others
• Traditionally HID system actives bulb through transiting high voltage over high power line, so there is certain limitation in distance. D1's whole-in-one design has no limitation of distance between ballast and bulb.
  
• High power xenon lamp is the newest / the latest technology specifically developed for cars headlight, and provides driving fun. In improving the technique and safety car suppliers tend to use D1 HID, which High-pressured producer and HID are a whole.
• Our own developed SL-D1 is one dividing into two, the color temperature of HID bulb can be changed depending of the personal demand of customer.

• Dividable SL-D1 and HID bulb (SL-D1 Igniter Socket with permit)
• HID system lowers the cost.
• D1 lamp holder made by High-pressured producer and bulb. Due to the dividable design, if the bulb is consumed, only the replace of bulb is needed, High-pressured producer remains, which reduce the cost waste.
  
• The color temperature of bulb can be changed.
• Originally the D1 is made whole in one, no separation of High-pressured producer and bulb. If wish to change the color of HID, whole set has to be changed. But using dividable D1, one can change the HID bulb to several of colors. Realize the possibility of lower cost.
  
• D1S, D1R, D3S, D3R design and developing
• Following the trend to develop new non-mercurate D3, D4 bulbs to avoid the environmental pollution with the technique of dividable bulbs, the D1 non-mercurate bulb is easily set.
• SL-D1 system of our company supplies car industry highly safe products and expecting to lead xenon HID grow and expand. Now, SL-D1 system has became an indispensable HID product.

• Email this page
• Bookmark this page
• Print this page
• Share: