Fuel Pump Test Bench
Fuel Pump Test Bench
TEST BENCHES MEET ISO4008
7HP - 30 HP
TST-C SERIES
MAIN FEATURES:
Quick view the characteristic curve of governor in dynamics.Test pump with the curve of governor. Save time, save effort, rapid, audio-visual, accurate.It's a very good tool for specialist to test pump.
Computer (PC) measure and control. Standard computer and standard ports. Hard disk, Windows operating system.
High definition, LCD monitor
Four ways to adjust speed. Hand, digital, programmed 8-steps preset and slide.
You can set up test data of injection pump, and use it to control test bench. You can set up database of governor's curve.You can compare the test curve with the standard curve of governor.
You can get a report of a tested pump.
Two control system. Computer and instruments. You can select one of them when you operate the test bench.
With protect functions for over and low voltage and short phase. Save electric power. High output torque, low fall of rotation speed. Adjusting speed quickly.
It can test both distributor ( VE ) and in-line pumps.
Heavy duty type, with two rear electrical cabinets
A/C direct driving system (no belts or gears). 100% power output without loss.
Frequency variable speed controller, high accuracy and reliability,
smooth running, low noise, increased efficiency
Automatic test oil constant temperature control,through the cooling and heating systems
Continuously variable speed control, pre-setting function
Electronic automatic speed feedback system,keeping excellent stability of speed.
Motor protection system
Convenient and accurate fuel measurement control
Standard test injector as per ISO7440 or heavy duty type
Oil supply with both low & high pressure back ways
12V and 24V DC power supply
Frame construction with cover panels removable,convenient for servicing
Vacuum device
Two working sides, arbitrary each other
Reduced shock, vibration and noise
Complete standard accessories and tools
MAIN TECHNICAL DATA:
Electricity: 380V, 50Hz, 3 phase or 220V, 60 Hz, 3 phase
Rated power: 10 hp, 15 hp, 20 hp, 25 hp, 30 hp
Max. speed: 4000 rpm
Speed control accuracy: 1 rpm
Max. tested cylinders: 12 cylinders
Selectable range of counting strokes: 0 - 9999 times
Oil tank volume: 40 ltr. / 60 ltr.
Oil supply pressure: low 0 - 0.4 MPa, high 0 - 4.0 MPa
Test oil temperature: automatic control
Volume of measuring graduates: 45 ml & 150 ml or 45ml & 260 ml
Air:-0.03-0/0-0.3Mpa.
Main shaft revolving direction: clockwise and anti-clockwise
Center distance (clamping bed to coupling center): 125 mm
Weight: approx. 830 kgs - 1800 kgs.
MAIN FUNCTIONS:
Map and check the curve of governor (idle , part and full load ).
Checking of the advance device in dynamics.
Measurement of each cylinder's delivery at any speed.
Checking of each cylinder's injection timing with static.
Measurement of rack travel at any speed.
Checking of the LDA.
Checking of the mechanical governor.
Checking of the pneumatic governor.
Checking of the vacuum capacity of governor.
Measurement of the internal pressure of distributor pump body.
Measurement of the reflux delivery of distributor pump.
Testing of the electro-magnetic valve of distributor pump.
Checking of the transfer pump.
Checking of the sealing of injection pump body.
