High Speed H Type Drilling Machine
Slow Start System:
The slow start mechanism is design to cope with cutting hard oxidized surfaces of rolled steel materials.
Return System:
The return system allows the next hole to be worked immediately. When the hole is completed, the electric drill lifts up speedy then stops.
Cartridge Type Oil Tank:
The oil tank is a cartridge type with a big capacity. One - touch oil tank replacement allows holes to be cut successively without stopping work.
Solidly Designed for Out - Standing Durability
Designed with the greatest possible consideration for lasting quality, it is provided with a switch knob protector, an oil dropper inside the electric drill, and the feed motor is fully enclose within the body of the machine.
Electronic Controller:
When speed is over 5 ampere, the signal lamp will be lighted, and the work will stop automatically. Turn on the restart switch before operation.
| Power source (single phase) | 110V / 120V 50 / 60HZ | 220V / 240V 50 / 60HZ |
|---|---|---|
| Motor: Rated output | 850 W | 850 W |
| Motor: Rated ampere | 7 A | 3.5 A |
| Motor: No-load speed | 500 R.P.M. / 780 R.P.M. | 500 R.P.M. / 780 R.P.M. |
| Hole size: Diameter | 16 mm thru 50 mm (23 / 32" thru 1.31 / 32') | 16 mm thru 50 mm (23 / 32" thru 1.31 / 32') |
| Hole size: Max. depth | 50 m / m (1.31 / 32") | 50 m / m (1.31 / 32") |
| Magnet dimensions | 200 mm x 100 mm (7 - 7 / 8" x 3 - 15 / 16") | 200 mm x 100 mm (7 - 7 / 8" x 3 - 15 / 16") |
| Magnet holding power | 1,000 kgf | 1,000 kgf |
| Weight | 25 kg (55 pounds) | 25 kg (55 pounds) |
Main Products:
Riveting Machines, Portable Magnetic Stand for Drill, Hydraulic Punching Machine, Hole Cutter Tapping Machines for Nuts, Drilling Machine, Drilling / Boring Machines
