Product ID: CMSQ2

PET Blow Molding Machine for PET 2 Liter Bottle

CMSQ2 PET blow molding machine for mass production of PET bottles with volumes up to approximately 2000ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.

Click here for details.

• PET Markets of CMSQ2:
• Mineral Water, Pure Water, Still Drinks.
• Alcoholic Drinks, Soda Drinks, Carbonated Water, Carbonated Drinks, Beer Bottle, Beverage Bottle.
• Juice Drinks, Tea Drinks, Sport Drinks, Coffee Drinks.
• Edible Oil, Sauces, Ketchup.
• Cosmetics, Clean Lotion.
• Liquid Detergent, Shampoo, Body Lotion.
• Pickle Food
• Insecticides Bottle, Pesticides Bottle.
• Container
• Max neck diameter: Ø25 ~ Ø38mm
• Max production capacity: 2,000 ~ 3,000 pcs/hr
• Max body diameter: Ø115 mm
• Max container height: 320 mm
• Max bottle capacity: 2,000 ml
• No. of cavities: 2
• Heating Oven
• No. of ovens: 2 ~ 4
• No. of infrared heaters in each oven: 8
• Heating load: 32 ~ 64
• Air Pressure
• Low pressure: 7 kg/cm²
• High pressure: 35 kg/cm²
• Cooling Water
• Cooling capacity: 18,000 kcal/h
• Water consumption: 80 l/min
• Water temperature: 10 ~ 12°C
• Pressure: 2 bar
• Installation power: 40 kw
• Total consumption power: 40 kw
• Machine dimension: 2.7 x 2 x 2.57 m
• All specifications and designs are subject to change without notice.

Features:

• Servo motor controls open-closed mold, stretch and blow, chain movement.
• Fast setting position: adjustable speed at any time.
• Precision: under servo motor control, the precision will be controlled +0.001 m/m.
• Low noise: the machine in running condition be adjusted from high speed to slow speed, and it will not make loud noise.
• Clean is the most special feature of servo motor which does not need any air or hydraulic lubricant. The machine saves power consumption.
• Output: 2,000 ~ 3,000 pcs/hr. (2 cavities)

• Minimum Order: Negotiable
• TEL: 886-4-22332281
• FAX: 886-4-22306247
• E-mail: tuchuan@ms6.hinet.net, cm.pet@msa.hinet.net, cm-blow@umail.hinet.net