CMH-1000C Blow Molding Machine is the most cost-effective solution for mass production of bottles for small and medium scale factories. The machine is also designed for containers with volumes up to 6-20 litters. In addition to this, we are able now to provide our clients the technical know-how for processing PET perform on our semi-auto machine to produce 5 gallon PET containers as a cost effective alternative to the traditional 5 gallon PC water tank.
Specifications:
- Plastic Markets of CMH-1000C:
- Mineral Water, Pure Water, Still Drinks.
- Soft Drinks, Carbonated Drinks, Beer, Alcoholic Beverages.
- Fruit Juice, Tea Drinks, Sport Drinks, Coffee Drinks.
- Edible Oil, Sauces, Ketchup.
- Cosmetics
- Pharmaceuticals and Personal Care.
- Liquid Detergent, Shampoo, Body Lotion.
- Pickle Food
- Jars and Confectionary Containers.
- Tennis Can
- Insecticides Bottle, Pesticides Bottle.
- Container
- Max neck diameter: Ø28 ~ Ø175 mm
- Max production capacity: 60 ~ 120 pcs/hr
- Max body diameter: Ø280 mm
- Max container height: 500 mm
- Max bottle capacity: 25,000 cc
- No. of cavities: 1
- Mould
- Carry pitch
- Mold center distance
- No. of preform mandrels
- Heating Oven
- No. of ovens: 4
- No. of infrared heaters in each oven: 8 ~ 13
- Heating load: < 48 ~ 104 kw
- Air Pressure
- Low pressure: 7 kg/cm²
- High pressure: up to 35 kg/cm²
- Cooling Water
- Cooling capacity: 20,000 kcal
- Water consumption: 120 l/min
- Water temperature: 10 ~ 12°C
- Pressure: 2 bar
- Installation power: 52 ~ 107 kw
- Total consumption power: < 52 ~ 107 kw
- Machine dimension: 2.8 x 1.14 x 3 m
- Machine weight: 2.5 ton
- All specifications and designs are subject to change without notice.
Features:
- Offers two functions in a single machine by simply changing the mold from single to double cavity mold.
- Consistent operation, minimal trouble and easy maintenance.
- Requires little floor space, suitable for small to middle size factories.
- Infrared ray heating tubes combined with rotary design ensures extremely uniform heating for performs. Superior molding performance and minimum product defects.
- Heating zones can be adjusted to meet production variations.
- The stretch shaft is located on the mold center for convenient operation and adjustment and rigid structure. Superior air tightness for high-pressure blowing upgrades molding performance.
- Output: 60 ~ 120 pcs/hr
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-22332281
- FAX: 886-4-22306247
- E-mail: tuchuan@ms6.hinet.net, cm.pet@msa.hinet.net, cm-blow@umail.hinet.net