CM-65T Blow Molding Machine is three die head extrusion blow molding machine and suitable for producing PE/PP containers. This series of Blow Molding Machine is suitable for plastic containers and bottles.
Specifications:
- Plastic Markets of CM-65T:
- Milk Drinks, Juice Drinks, Tea Drinks, Sport Drinks, Coffee Drinks.
- Edible Oil, Sauces, Ketchup.
- Cosmetics, Clean Lotion.
- Liquid Detergent, Shampoo, Body Lotion.
- Pickle Food
- Insecticides Bottle, Pesticides Bottle.
- Oil Bottle, Petroleum Bottle.
- Packing Container
- Material to be used: PE/PP
- Screw diameter: Ø65 mm
- L/D ratio: 1 : 24
- Screw speed range (PE) / rpm: 15 ~ 85
- Driving motor PE: Invertor 20 HP
- Max. extrusive capacity / per hour: 53 kgs
- Heating zone (Barrel): 3 points
- Heating capacity (Barrel): 7.5 kw
- Die Head
- Heating zone (Die head): 4 points
- Heating capacity (Die head): 10 kw
- Triple mold center distance: 100 mm
- Die nozzle outer diameter: Ø45 mm
- Mould Plate
- Max. opening stroke: 550 mm
- Min. close stroke: 120 mm
- Mold size (Max.) W x H: 270 x 750 mm
- Hydraulic System
- Hydraulic pump motor: 15 HP x 6 P
- Hydraulic oil pressure: 100 kg/cm²
- Mold clamping force: 7 ton
- Oil tank capacity: 120 gallon
- Products
- Product weight (Max.): 60 g x 3 pcs
- Product diameter (Min. / Max.): Ø20 ~ Ø90 mm
- Product capacity (Min. / Max.): 500 cc x 3 pcs
- Total power consumption: 43.6 kw
- Weight of machine: 5.5 ton
- Packing size (L x W x H): 1.22 x 0.73 x 0.89 m
- Machine meas't (m³): 13 m³
- Optional Equipment
- Air Compressor: 7.5 HP
- Chiller: 5 TON
- Cooling Tower: 15 RT
- Auto Loader: 2 HP
- Hopper Dryer: 50 KG
- All specifications and designs are subject to change without notice.
Features:
- Screw can be designed upon customer's request, the screw and barrel are made of special steel and processed by nitrifying.
- The special structure of extruder, and the vertical and longitudinal adjustment of flat-table can be adjusted automatically, so as to the blow nozzle post, furthermore, which equipped with water cooling device.
- Special designed of hydraulic, circuiting and accuracy of moulding movement and positioning. Furthermore, there can be installed the parison parameter controller to adjust the thickness automatically.
- Which can be installed auto bottom releasing of moulding and auto circular cutter for jar.
- Adopted independent electrical cabinet and reducing vibration and selecting computer controlling system upon customer's request.
Certificate:
ISO 9001:2000
Ordering information:
- Minimum Order: 1 set
- TEL: 886-4-22332281
- FAX: 886-4-22306247
- E-mail: tuchuan@ms6.hinet.net, cm.pet@msa.hinet.net, cm-blow@umail.hinet.net