CM-55F Blow Molding Machine is quadruple die head extrusion blow molding machine and suitable for producing PE/PP containers. This Blow Molding Machine is excellent for bottle manufacturers of easy operation and control.
Specifications:
- Model: CM-55F
- Material to be used: PE/PP
- Screw diameter: Ø55 mm
- L/D ratio: 1 : 24
- Screw speed range (PE) / rpm: 20 ~ 80
- Driving motor PE: VS 20 HP
- Max. extrusive capacity / per hour: 40 kgs
- Heating zone (Barrel): 3 points
- Heating capacity (Barrel): 5.1 kw
- Die Head
- Heating zone (Die head): 5 points
- Heating capacity (Die head): 8.3 kw
- Max. accumulative capacity: 85 kg
- Mould Plate
- Max. opening stroke: 330 mm
- Min. close stroke: 80 mm
- Mold size (Max.) W x H: 220 x 600 mm
- Hydraulic System
- Hydraulic pump motor: 20 HP x 6 P
- Hydraulic oil pressure: 100 kg/cm²
- Oil tank capacity: 100 gallon
- Products
- Product weight (Max.): 40g x 4 pcs
- Product diameter (Min. / Max.): Ø10 ~ Ø60 mm
- Product capacity (Min. / Max.): 30 ~ 150 cc x 4 pcs
- Total power consumption: 43.2 kw
- Weight of machine: 7 ton
- Optional Equipment
- Air Compressor: 5 HP
- Chiller: 5 TON
- Cooling Tower: 10 RT
- Auto Loader: 2 HP
- Hopper Dryer: 50 KG
- All specifications and designs are subject to change without notice.
Features:
- Screw can be designed upon customer's request, the screw and barrel are made of special steel and processed by nitrifying.
- The special structure of extruder, and the vertical and longitudinal adjustment of flat-table can be adjusted automatically, so as to the blow nozzle post, furthermore, which equipped with water cooling device.
- Special designed of hydraulic, circuiting and accuracy of moulding movement and positioning. Furthermore, there can be installed the parison parameter controller to adjust the thickness automatically.
- This model machine is suitable for small bottles mass production project.
Certificate:
ISO 9001:2000
Ordering information:
- Minimum Order: 1 set
- TEL: 886-4-22332281
- FAX: 886-4-22306247
- E-mail: tuchuan@ms6.hinet.net, cm.pet@msa.hinet.net, cm-blow@umail.hinet.net