Blow Molding Equipment
Chia Ming Machinery Co., Ltd is a professional manufacturing Blow Molding Equipment manufacturers
The CM-45SH2D can handle bottles up to 1.5 L. Norland also offers a line of smaller blow molders , so there should be one that’s just right for your requirements. Norland blow molders allow you to take advantage of increased demand for plastic bottles and other plastic packages. The Norland system uses "preforms" to simplify the production process. The preforms look like test tubes used in laboratories, except they are threaded on the top for a screw finish cap to be applied.
- Plastic Markets of CM-45SH2D:
- Milk Drinks, Juice Drinks, Tea Drinks, Sport Drinks, Coffee Drinks.
- Edible Oil, Sauces, Ketchup.
- Cosmetics, Clean Lotion.
- Liquid Detergent, Shampoo, Body Lotion.
- Pickle Food
- Insecticides Bottle, Pesticides Bottle.
- Oil Bottle, Petroleum Bottle.
- Packing Container
- Material to be used: PE/PP
- Screw diameter: Ø45 mm
- L/D ratio: 1 : 24
- Screw speed range (PE)/rpm: 15 ~ 85
- Driving motor PE: Invertor 10 HP
- Max. extrusive capacity / per hour: 28 kgs
- Heating zone (Barrel): 2 points
- Heating capacity (Barrel): 3.9 kw
- Die Head
- Heating zone (Die head): 2 points
- Heating capacity (Die head): 3 kw
- Die nozzle outer diameter: Ø55 mm
- Mould Plate
- Max. opening stroke: 330 mm
- Min. close stroke: 80 mm
- Mold size (Max.) W x H: 220 x 600 mm
- Hydraulic System
- Hydraulic pump motor: 7 1/2 HP x 6 P
- Hydraulic oil pressure: 100 kg/cm²
- Mold clamping force: 3 ton
- Oil tank capacity: 50 gallon
- Products
- Product weight (Max.): 100g
- Product diameter (Min. / Max.): Ø20 ~ Ø100 mm
- Product capacity (Min. / Max.): 250 ~ 1,000 cc
- Total power consumption: 20 kw
- Weight of machine: 4 ton
- Packing size (L x W x H): 0.96 x 0.72 x 0.89 m
- Machine meas't (m³): 8.7 m³
- Optional Equipment
- Air Compressor: 5 HP
- Chiller: 3 TON
- Cooling Tower: 10 RT
- Auto Loader: 1 HP
- Hopper Dryer: 50 KG
- All specifications and designs are subject to change without notice.
- Screw can be designed upon customer's request, the screw and barrel are made of special steel and processed by nitrifying.
- The special structure of extruder, and the vertical and longitudinal adjustment of flat-table can be adjusted automatically, so as to the blow nozzle post, furthermore, which equipped with water cooling device.
- Refer to PE/PVC for changing production to each other which just to replace some components.
- Special designed of hydraulic, circuiting and accuracy of moulding movement and positioning. Furthermore, there can be installed the parison parameter controller to adjust the thickness automatically.
- Which can be installed auto bottom releasing of moulding and auto circular cutter for jar.
- Adopted independent electrical cabinet and reducing vibration and selecting computer controlling system upon customer's request.
- ISO 9001:2000
Main Products:
Blow Molding Equipment, PET Preform, Plastic Blow Molding Machine, PET Blow Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Equipment, Bottle Manufacturers