This tester is designed specially for tensile strength, elongation, tearing, Adhesive, stress-strain, peeling, shearing... etc. Functions of yield point, elasticity modulus, Young's modulus, grinding modulus, puncture ...etc. are also available.
Specifications:
- Capacity: 0 ~2000kg.
- Speed controlled by computer system.
- Max.capacity set up: to protect the computer system from load weight over the machine capacity, the safety capacity is adjustable to be set up in different load. The tester automatically stops while load reaches the adjusted capacity.
- Sensor(Load cell): adopting precision load cell being used in high technical products nowadays.
- Automatic endpoints: The tester stops automatically when the specimen breaks to protect the machine.
- Dust cover: guide lever with dust-proof equipment to extend useful life and accuracy.
- Upper and lower limit with micro switch equipment: while the upper lever reaches the highest and lowest points, micro switch stops automatically to protest load cell, motor. As incorrect use of this tester may result in property damage.
- Printer: adopting DJ-3325C printer, automatically prints the max. value and break point... etc.
- Grips: with one set of grips.
- The base: made of steel plant and hardened surface treatment. Never deformed.
- Speed: Automatic and manual adjustment are available. Once the speed is set up, it will automatically forward and reverse with the speed. Manual adjusting speed is also available.
- Guarantee: one year free of service.
- Power: 220V 50HZ or selected by customers.
- Motor: 1HP Servo motor.
- Transmission: with reduced velocity to bring worm-gear and worm for durability.
- Signal Receiver System:
- Signal amplification
- Resolution: 1/200,000
- Accuracy: 0.5%
- Force sensor.
- Displacement sensor.
- Servo control system.
- Control System:
- PC control: control mode: close loop
- Constant speed control mode
- Constant speed load control mode
- Constant speed stress control mode
- Constant speed strain control mode
- Constant speed stress - constant speed strain mode
- Select unit and other conversion unit.
- KG <--> CM.
- KG <--> MM.
- N <--> CM.
- N <--> MM.
- LB <--> IN.
- Chinese <--> English
- Data-Processing System
- Data acquisition and data analysis
- Self-defined write/read path of data file
- Self-defined testing module base on any kinds of test standard.
- Load vs. Displacement mode
- Load vs. Time
- Stress vs. Strain
- Stress vs. Time
- Strain vs. Time
- Signal conversion controller:
- Sensor
- Encoder
- Data Collector
- 686 Computer
- Storage Medium
- Adopt MAXTOR, IBM, SEAGATE...etc brand of hard disk.
- Upto 40GB
- CPU: Intel Pentium 4 CELERON 1.7 GHZ above.
- Main Memory
- Standard 256MB RAM DDR-266.
- Able to extend to 2.0GB.
- 184PIN SIMM SOCKET DIMMx3.
- Display Card: AGP high speed graphic card (sis-651 display chip).
- Floppy Disk
- Standard 1.44MB FDD*1.
- Adopt TEAC, PANASONIC, MITSUMI...etc brand.
- CD-ROM: Above 52 x high speed CD-ROM.
- Key Board: 104 key standard.
- Power supply
- 250W high efficiency, able to switch 115V/220V (in compliance with national standards).
- You Can Choice 180W/230W/250W/300W
- Operating System
- With Microsoft Windows XP Home Edition.
- Compatible for OS/2, NOVELL, UNIX, WINDOWS NT for operation system.
- Monitor: 17" high revolution (1280x1024)
- Printer: DJ-3325C printer
- Safety Specification: Qualify for FCC-B, UL, DHHS, CAS, TUV, NOVELL, EPA...etc standards.
Features:
- Function:
- Yield Point &Yield Strength
- 0.2% Offset Yield & Yield Strength
- Stress Kg/Mm2
- Percent Elongation
- Energy
- Break Modulus
- Ultimate Value
- Break Value
- Deformation 1 (Load - Elongation)
- Deformation 2 (Elongation - Load)
- X -Y Diagrams
- X -T Diagrams
- Compare Diagrams
- Average Value
- Standard Deviation
- Minimum Order: 1 Set set
- TEL: 886-4-26391141
- FAX: 886-4-26392354
- E-mail: sales@mail.chunyen.com.tw; chunyen1@ms15.hinet.net; service@mail.chunyen.com.tw