Water Penetration Tester
Water penetration tester tests water penetration of waterproof material by a raising cup.
To determine the water-tolerant of waterproof textile, the tester has high and low pressure testing methods.
This tester is aim to test the water permeability-resistance degree for Water-Resistance fiber (or other material), uses pneumatic grip to speed up the testing time.
There are three kinds of Test method for thie testing machine:
a. Water pressure method: Put dry specimen to cover on water surface.
Then record the water level (cm) at once after the specimen occurred 3 places permeated by water on its surface.
b. Certain water pressure method: Put dry specimen to cover on water surface. Use 1cm/sec speed to raise water level up to a certain level, then record the time (sec) at once after the specimen surface occurred 3 places permeated.
c. Water leakage: operation method same as water pressure. Just stop water level rising immediately when water lever rising up to a certain position (10cm), to test the water leakage capacity within 1 certain time.
The precision test equipment evaluates material test and provide reliable data.
- 1.Specimen: 8inch x 8inch (about 20cm)
- 2.Pressing area dimension: 4.5inch (about 114mm)
- 3.Grip method: pneumatic, able to preset gripping strength.
- 4.Water pressure height: 0~350cm water height
- 5.Pressure speed: 1~3cm/sec water height
- 6.With upper/lower limit setting, to protect the machine, lower limit is zero point of water level, this tester must return to lower limit position before continuous next test, to ensure accuracy of each test.
- 7.With fast homing away device, to avoid waiting for a long time for restart.
- 8.Power source: Single Phrase, 220V,5A
- 9.Dimension:60x70x430cm
- 10.Weight: 300kg
- Branded product.
- Buyer's label offered.
- Sample purchase.
- CE
Main Products:
material testing machine, tensile testing machine, universal testing machines, impact tester, abrasion tester, torque tester,testing equipment,material testing equipment,
