AKRON Abrasion Tester
A AKRON Abrasion Tester for testing materials of rubber,PU,EVA.sole,tire,caterpillar treads or tracks of a tank, etc.
Akron Abrasion Tester is suitable for the test of products made by rubber, PU, EVA, etc. Such as: sole, tire, the caterpillar treads or tracks of a tank, etc.
The method is use specimen forming machine (Refer to our QC-601, QC-602), to make a circular specimen at thickness 13mm, diameter 63mm, and inner hole diameter 13mm.
If such specimen cannot be made by mold, take a strip shape specimen at length 220mm, width 12.7mm, thickness 13mm, paste on a round shape rubber plate (outer diameter 60.5mm, thickness 13mm, hardness Shore A 60° - 70°), the connection part of this strip shape specimen should be cut into slanting and opposite facing, make two ends match well after connected, and not loosing, make the round shape specimen gripped on the specimen holder at 15°, apply 2pounds or 6pounds of load, and grinding with #40 grinding wheel, after 2000turns or 3000turns, calculate the quantity of abrasion.
Specimen should use “Specific gravity meter” to measure the specific gravity before testing and after testing, and weight before abrasion and after abrasion.
- Weight: 2Pounds, 6Pounds.
- Testing angle: 15° (Adjustable)
- Grinding wheel: #40
- Diameter of Grind wheel: 150mm
- With automatic steel cleaning brush wheel.
- Counter: LCD displayer 6 digit, Auto-brake device.
- Dimension: 65 ×45 ×45 cm (W ×D ×H)
- Weight: 45kg
- Power supply: single phase 110V/60Hz or 220V/50 Hz
- Attachment: Warranty, user manual, each one copy.
- Branded product.
- Buyer's label offered.
- Sample purchase.
- CE
Main Products:
material testing machine, tensile testing machine, universal testing machines, impact tester, abrasion tester, torque tester,testing equipment,material testing equipment,
