Blow Molding MachineClick here for details.
Blow Molding Machine
Product ID: DMK-L6Send Inquiry
The DMK-L6 blow molding machine is PET stretched with high automation and intelligence working system. The equipment can be controlled through touch screen and the running status will be shown on the screen immediately. This equipment is in high quality because it can provide steady infrared heating system while blowing. Besides, it has precise blow-mould closing system to ensure the quality of your products. Another features of the blow molding machine is that it is designed with closed production zone, so the good self-lubrication system can help you to avoid the contamination, building a win-win business for you.
The moulding machine has 6 cavities and the maximum capacity of the products is 700mL and 6000bottles/hr. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc. The speed of the Demark blow molding machine for 6 cavity is at 6000BPH, and 8000BPH for 8-cavity while 12000BPH for 12-cavity and 16000BPH for 16-cavity. The molding equipment is low cost as well as low consumption of electricity, air and water.
As for the setting of our blow molding machine, we apply world-famous brand to level up the quality of the equipment. We apply Siemens PLC color display, FESTO pneumatic parts, and National controller of perform transfer servo motor. We aim at the best to serve our customers not only the best product but also the unforgettable experiences while applying the moulding machines. If you are interested in our products, please do not hesitate and make your own inquiry today!
|Number of cavity||6||8||12||16|
|Number of lamp||60||36||36||36|
|Actual power consumption||50KW||50KW||70KW||70KW|
|Operatating low pressure||0.8-1.0Mpa||0.8-1.0Mpa||0.8-1.0Mpa||0.8-1.0Mpa|
|Low pressure consuming||2000L/min||2000L/min||2600L/min||4600L/min|
|High pressure consuming||2.8~3.5m³/min||2.8~3.5m³/min||5.0~7.0m³/min||7.0~9.5m³/min|
- Stable performance with advanced PLC.
- Conveying preforms automatically with conveyor.
- Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
- High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
- High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
- No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
- Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
- Strong clamping force with high pressure and double crank links to lock the mold.
- Two ways of operating: automatic and manual.
- Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
- Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
- Contamination is avoided for the bottle body.
- Ideal effect of the chilling with the chilling system.
- Easy installation and starting
- Low rejection rate: less than 0.2 percent.
Sales ContactRichard Ji, Tel:＋86-13857600357
Address26# Chaoyuan Road, Western Industrial Area, Huangyan, Taizhou, Zhejiang, P.R.China