ABI-125L is a suitable for making 220 liter L-ring drum and open top barrel drum.
- Screw O125mm, L/D=30:1
- Main drive 200HP DC motor or AC motor with vector inverter.
- European made helical gearbox with thrust bearing of SKF 29440.
- Guarantee output 400kg/hr
- Accumulator capacity 25 liter (17.5kg)
- The clamping unit is for tie bar-less & free access for mold in/out.
- The clamping size is for LK type clamp unit of 6 locking device with proportional valve control for locking speed.
- The clamping size is 1,200mm Height x 1,330mm Width
- Directional proportional valve for clamp open and close, and for injection speed.
- Unscrew device for blow pin unit for inner thread neck.
- Safety device with photo cell fixed on two sides of clamp platens.
- Robot arm to take the finished product out from clamp area.
- Slide chute to collect the finished product.
- Barber-Colman MACO 6,000
- Optional Attachments: -Safety door with interlock device for electric / hydraulic / pneumatic system. -Post cooling unit with alum mold to shorten cycle time. -Vertical cutting saw. -Strong crusher completed with turbo blower and silo tank. -Water chiller and air compressor. -Blow mould and injection cap molds. -3DX Radial Parison Programming System, to enhancing material distribution to improve the performance by using hydraulic cylinders to pull and push a ring into a programmed series of shapes as achieving better drop test strength of maintaining minimum wall thickness.
Specifications:
Certificate:
ISO2000 / CE Certificates
Ordering information:
- Minimum Order: Negotiable
- TEL: +886-6-2532157 (ext.123)
- FAX: +886-6-2533079
- E-mail: sales@fki.com