|
Gau Feng Machine Shop Co., Ltd.
 |
Product |
|
|
Product ID: GF-700 Series
Wood machine - Wide Belt Sander , belt sander , wide belt sanding (2 Capacity)
Outside Mounted Motor
Conveyor table height from floor: 900mm.
Convenient Size Correcting
Sanding size error can be fast and conveniently corrected by adjusting the parallelism. Between the sanding belt drive rollers.
European Imported Motor (Optional)
Upon request, the machine is available to equip with European imported motor for upgrading efficiency and minimum trouble.
Timing Belt Transmission
The machine employ imported high quality timing belt, providing full power transmission without belt slipping problem.
Brake Controlled by Photocell Sensor
In case sanding belt runs out of normal track or breaks, the photocell sensors actuate brake immediately. This avoids damaging on machine while providing a dependable safety protection. (Conventional limit switch is often damaged and insufficient for safety protection.)
Automatic Lubricator (Optional)
The lubricator provides automatic and frequent lubrication to the conveyor table elevation mechanism. It ensures smooth elevation motion and high positioning accuracy, and extends pants service life.
Precision Ball Screw
The conveyor table elevation is transmitted through the imported high precision ball screws. Loading capacity on each ball screw is 1.8tons. Accuracy tolerance is ±0.005mm
Sanding Belt Tension Elevation Cylinder
Employs oscillating bearing design to ensure smooth oscillation motion. High quality air cylinder features long service life.
|
 Click here for details.
|
|
|
| Model |
GF-700-A |
GF-700-O |
GF-700-OA |
GF-700-OOA |
| Working width |
650 mm |
650 mm |
650 mm |
650 mm |
| Working height |
130 mm |
130 mm |
130 mm |
130 mm |
| Main motor standard |
15 HP |
20 HP |
20, 15 HP |
20, 15, 15 HP |
| Feed motor |
2 HP |
2 HP |
2 HP |
3 HP |
| Table hoist motor |
1/2 HP |
1/2 HP |
1/2 HP |
1/2 HP |
| Feed speeds (Variable) |
4-16 M/min |
4-16 M/min |
4-16 M/min |
4-16 M/min |
| Sanding belt size |
84" x 26" |
84" x 26" |
84" x 26" |
84" x 26" |
| Compressed air required |
5 kg/cm² |
5 kg/cm² |
6 kg/cm² |
6 kg/cm² |
| Exhaust volume requirement |
1,030 M³/Hr |
1,030 M³/Hr |
2,064 M³/Hr |
3,500 M³/Hr |
| Net weight |
1,350 kg |
1,350 kg |
2,200 kg |
2,800 kg |
| Gross weight |
1,500 kg |
1,500 kg |
2,400 kg |
3,150 kg |
Main Product:
Wide Belt Sander, Wide Belt Planning Sanding Machine, Sander Machine, Moulder Machine, Wide Belt Sander, 4 Side Planer & Moulder, Tenoner Machine
|
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-22394422
- FAX: 886-4-22394420
- E-mail: gau.fong@msa.hinet.net
|
|
Print this page
Send an inquiry;)
