4 Side Planer & Moulder - Four Side Planner, Side Planner, Four Side Moulder
Product ID: GF Series

These CE certified 4 sides planer & moulder integrates many fine features and comprehensive safety guards.
The machines are quality constructed ensuring maximum dependability after years of operation.

Specifications:

Features:

• CENTRALIZED PRESSURE REGULATION
• All pressure regulations for the entire pneumatic system are centralized at front of the machine for added convenience for pressure regulations.
• Sectional pressure adjustments for all pressure rollers ensure consistent pressure.
• POWERED INFEED TABLE ROLLER
• The roller in the infeed table is powered, providing a smooth feeding effect for hard-feeding stock.
• VERTICAL SPINDLE ADJUSTMENT UP TO 60 MM
• It allows to fit several tools on the vertical spindle, eliminating troublesome cutter change.The 60mm spindle adjustment provides full utiliztion for a single cutter.
• SIDE FRONT PRESSURE PLATE ON LEFT VERTICAL SPINDLE
• It fully eliminates unsmooth problem when feeding short or narrow stock. The pressure plate is easy to adjust
• CENTRALIZED LUBRICATION
• The spindles are lubricated by the centralized lubrication system for convenience.
• SEPARATED MOTOR AND SPINDLE
• separate mounting of motor and spindle eliminates spindle vibration.Fitted with a high speed belt for power transmission, this configuration enables a smooth moulding effect and close tolerance result while in heavy cutting.
• UNIVERSAL SPINDLE(OPTIONAL)
• This spindle can be tilted for complicated cutting jobs.
• SPINDLE DIGITAL POSITIONING CONTROLLER (OPTIONAL)
• Available to equip for controlling any spindle as requested.
• The digital positioning controller permits fast, convenient and high accuracy spindle positioning.
• FEED MAGAZINE(OPTIONAL)
• This mechanism provides maximum convenience for feeding stock into the machine,keeping downtime to the minimum, and increasing the rate of prouction.
• Especially helpful when cutting short stock.




Others:

Model	GF-5S23	GF-6S23	GF-7S23	GF-8S23
Capacity: Planning width	10 ~ 230 mm	10 ~ 230 mm	10 ~ 230 mm	10 ~ 230 mm
Capacity: Planning thickness	7 ~ 160 mm	7 ~ 160 mm	7 ~ 160 mm	7 ~ 160 mm
Capacity: Feeding speed. Inverter control	6 ~ 36 m / min	6 ~ 36 m / min	6 ~ 36 m / min	6 ~ 36 m / min
Capacity: Min length of out	230 mm	230 mm	230 mm	230 mm
Spindle: Spindle speed	6,000 rpm	6,000 rpm	6,000 rpm	6,000 rpm
Spindle: Spindle diameter	Ø40 mm	Ø40 mm	Ø40 mm	Ø40 mm
Spindle: Adjustment of vertical spindle	60 mm	60 mm	60 mm	60 mm
Spindle: Adjustment of horizontal spindle	20 mm	20 mm	20 mm	20 mm
Cutter diameter: Tool cutting circle, 1st bottom spindle, min. to max.	Ø125 ~ 160 mm	Ø125 ~ 160 mm	Ø125 ~ 160 mm	Ø125 ~ 160 mm
Cutter diameter: Tool cutting circle, vertical spindle, min. to max.	Ø100 ~ 180 mm	Ø100 ~ 180 mm	Ø100 ~ 180 mm	Ø100 ~ 180 mm
Cutter diameter: Tool cutting circle, horizontal spindle, min. to max.	Ø100 ~ 200 mm	Ø100 ~ 200 mm	Ø100 ~ 200 mm	Ø100 ~ 200 mm
Cutter diameter: Tool cutting circle, last bottom spindle, min. to max.	Ø100 ~ 250 mm	Ø100 ~ 250 mm	Ø100 ~ 250 mm	Ø100 ~ 250 mm
Motor horsepower: Spindle motor	7.5 HP, 10 HP	7.5 HP, 10 HP	7.5 HP, 10 HP	7.5 HP, 10 HP
Motor horsepower: Feeding motor. Inverter	5 HP	7.5 HP	7.5 HP	7.5 HP
Others: Table adjustment	12 mm	12 mm	12 mm	12 mm
Others: Infeed table length	1,800 mm	1,800 mm	1,800 mm	1,800 mm
Others: feed roller diameter	Ø140 mm	Ø140 mm	Ø140 mm	Ø140 mm
Others: feed roller width	2 x 50 mm	2 x 50 mm	2 x 50 mm	2 x 50 mm
Others: Machine dimension (L x W x H)	3,650 x 1,930 x 1,800 mm	4,250 x 1,930 x 1,800 mm	4,670 x 1,930 x 1,800 mm	4,960 x 1,930 x 1,800 mm
Others: Pocking dimension (L x W x H)	3,800 x 2,100 x 2,120 mm	4,400 x 2,100 x 2,120 mm	4,820 x 2,100 x 2,120 mm	5,110 x 2,100 x 2,120 mm
Others: Net weight	3,600 kgs	4,100 kgs	4,600 kgs	5,000 kgs
Others: Gross weight	4,100 kgs	4,700 kgs	5,200 kgs	5,700 kgs

Ordering information:

• Minimum Order: Negotiable
• TEL: 886-4-22394422
• FAX: 886-4-22394420
• E-mail: gau.fong@msa.hinet.net