4 Side Planer & Moulder - Four Side Planner, Side Planner, Four Sided Wood Planers
Product ID: GFS Series
Gau Feng Machine Shop Co., Ltd. is a highly-qualified, Taiwan-based supplier and manufacturer of Wooding Machine, Sander Machine. The supplier has been recognized as one of the most professional manufacturers in the industry since 1997. With both experience and innovation, the supplier is confident of providing buyers with quality Wooding Machine.
These CE certified 4 sides planer & moulder integrates many fine features and comprehensive safety guards.
The machines are quality constructed ensuring maximum dependability after years of operation.
- Universal Spindle (Optional)
- This spindle can be tilted for complicated cutting jobs.
- Feed Magazine (Optional)
- 1.This mechanism provides maximum convenience for feeding stock into the machine,keeping downtime to the minimum, and increasing the rate of prouction
- 2.Especially helpful when cutting short stock.
- Adjustable Short Stock Pressure Roller (Optional)
- The pressure roller for short stock can be fast raised,providing maximum convenience while in cutter changing or setup.
- Convenient Infeed Adjustment
- The infeed table and fence are conveniently adjusted by the separate control levers.
- Over Height Protection
- In case workpiece exceeds the rated maximum height, it will be restricted by the orer height protection device provided at the workpiece infeed end.
- Front and Rear Pressure Plate
- The front pressure plate features "drawback" , which fully avoid damage on cutters caused by an overheight workpiece.
- The rear pressure plate provides extremely uniform holding pressure for outstanding parallelism accuracy of machineing.
- Side Front Pressure Plate on Left Vertical Spindle
- Fully eliminates roughness problems when feeding short or narrow stock. The pressure plate is easy to adjust
- Convenient Spindle Adjustment
- All control levers for the spindles are located at the front of the machine for convenient adjustment. Each spindle is provided with a mechanical digital readout, giving accurate adjustment.
| Model | GFS-423 | GFS-523 | GFS-623 | GFS-523U | GFS-623U |
|---|---|---|---|---|---|
| Capacity: Planning width | 10 ~ 230 mm | 10 ~ 230 mm | 10 ~ 230 mm | 10 ~ 230 mm | 10 ~ 230 mm |
| Capacity: Planning thickness | 7 ~ 125 mm | 7 ~ 125 mm | 7 ~ 125 mm | 7 ~ 125 mm | 7 ~ 125 mm |
| Capacity: Min. working length | 230 mm | 230 mm | 230 mm | 230 mm | 230 mm |
| Capacity: Feeding speed | 6 ~ 25 m / min | 6 ~ 25 m / min | 6 ~ 25 m / min | 6 ~ 25 m / min | 6 ~ 25 m / min |
| Spindle: Spindle speed | 6,000 rpm | 6,000 rpm | 6,000 rpm | 6,000 rpm | 6,000 rpm |
| Spindle: Spindle dia. | Ø40 mm | Ø40 mm | Ø40 mm | Ø40 mm | Ø40 mm |
| Spindle: Adjustment of vertical spindle (axial) | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm |
| Spindle: Adjustment of horizontal spindle (axial) | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Cutter diameter: First bottom horizontal spindle | Ø100 ~ 150 mm | Ø100 ~ 150 mm | Ø100 ~ 150 mm | Ø100 ~ 150 mm | Ø100 ~ 150 mm |
| Cutter diameter: Right / left vertical spindle | Ø100 ~ 180 | Ø100 ~ 180 | Ø100 ~ 180 | Ø100 ~ 180 | Ø100 ~ 180 |
| Cutter diameter: Top horizontal spindle | Ø100 ~ 180 | Ø100 ~ 180 | Ø100 ~ 180 | Ø100 ~ 180 | Ø100 ~ 180 |
| Cutter diameter: Bottom horizontal spindle | - | Ø100 ~ 205 mm | Ø100 ~ 205 mm | - | Ø100 ~ 205 mm |
| Cutter diameter: Universal spindle | - | - | - | Ø100 ~ 180 mm | Ø100 ~ 180 mm |
| Motor horsepower: Bottom horizontal spindle | 7.5 HP | 7.5 HP | 7.5 HP | 7.5 HP | 7.5 HP |
| Motor horsepower: Right / left vertical spindle (1PC) | 10 HP | 10 HP | 10 HP | 10 HP | 10 HP |
| Motor horsepower: Top horizontal spindle | 7.5 HP | 7.5 HP | 7.5 HP | 7.5 HP | 7.5 HP |
| Motor horsepower: Bottom horizontal spindle | - | 7.5 HP | 7.5 HP | - | 7.5 HP |
| Motor horsepower: Universal spindle | - | - | - | 5 HP | 5 HP |
| Motor horsepower: Feed horsepower | 3 HP | 3 HP | 3 HP | 3 HP | 3 HP |
| Motor horsepower: Elevate horsepower | 1 / 3 HP | 1 / 3 HP | 1 / 3 HP | 1 / 3 HP | 1 / 3 HP |
| Others: Table adjustment | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |
| Others: Infeed table length | 2,000 mm | 2,000 mm | 2,000 mm | 2,000 mm | 2,000 mm |
| Others: Machine dimension (L x W x H) | 3,230 x 1,280 x 1,720 mm | 3,360 x 1,280 x 1,720 mm | 3,930 x 1,280 x 1,720 mm | 4,100 x 1,680 x 1,720 mm | 4,250 x 1,680 x 1,720 mm |
| Others: Pocking dimension (L x W x H) | 2,220 x 1,400 x 1,960 mm | 2,320 x 1,400 x 1,960 mm | 3,040 x 1,400 x 1,960 mm | 3,260 x 1,800 x 1,960 mm | 3,420 x 1,800 x 1,960 mm |
| Others: Net weight | 2,800 kgs | 3,200 kgs | 3,700 kgs | 3,800 kgs | 4,100 kgs |
| Others: Gross weight | 3,100 kgs | 3,500 kgs | 4,000 kgs | 4,100 kgs | 4,500 kgs |
Main Products:
Wide Belt Sander, Wide Belt Planning Sanding Machine, Sander Machine, Moulder Machine, Wide Belt Sander, 4 Side Planer & Moulder, Tenoner Machine
Related Products
Contact Details
CEO: Mr. Hsu Huan Chien
Sales Contact: CEO Hsu Huan Chien
Minimum Order:Negotiable
Address:No. 29, Chien-Cheng Lane, Beitun District Taichung City, 406 Taiwan
Tel:886-4-22394422
Fax:886-4-22394420
E-mail:
gau.fong@msa.hinet.net