HIGH QUALITY CONVEYOR BELT
The sander employs high quality belt for long service life.
ADDITIONAL EMERGFNCY STOP SWITCH
An additional emergency stop switch is provided on rear of the machine , providing and immediate stop control of al operating systems.
VARIABLE FEED SPEED DEVICE
The variable speed of the conveyor belt is achleved through variable speed pulley.
Permitting for sanding a variety of panel material feed speed is adjusted by turning a speed regulator knob.
DIGITAL POSITION CONTROLLER
The conveyor table adjustment is controlled by the digital position controller, providing accurate digital readout. The sanding thickness can be preset for maximum operation convenience.
CENTRALIZED CONTROL PANEL
All motion controls of the machine are centralized on a control panel. large, clearly simplify setup and start up.
SNADING BELT TECSION CONTROL
The sanding belt tension is actuated by cylinder, and oscillation tracking is controlled by photocell sensor.
Specifications:
Others:
| Model | GF-910 0A | GF-910 00A | GF-52 0A | GF-52 00A |
| Working width | 920mm(36') | 920mm(36') | 1300mm(51') | 1300mm(51') |
| Working height | 150mm(8') | 150mm(8') | 150mm(8') | 150mm(8') |
| Main motor standard | 20 , 15 HP | 20 , 15 ,15HP | 30 ,25 HP | 30 ,25 ,25HP |
| Feed motor | 3HP | 3HP | 3HP | 5HP |
| Table hoist motor | 1/2HP | 1/2HP | 1/2HP | 1/2HP |
| Feed speeds (Variable) | 4-16 M/min | 4-16 M/min | 4-16 M/min | 4-16 M/min |
| Sanding belt size | 36"x60" | 36"x60" | 50"x75" | 50"x75" |
| Compressed air required | 5 kg/cm² | 5 kg/cm² | 5 kg/cm² | 5 kg/cm² |
| Exhaust volume requirement | 3,500 M³/Hr | 3,500 M³/Hr | 6,860 M³/Hr | 9,870 M³/Hr |
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-22394422
- FAX: 886-4-22394420
- E-mail: gau.fong@msa.hinet.net