The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, ejector pin holes of large type injection molds.
Specifications:
- Capacity
- Number of drill spindle: 1 Quill
- Range of drilling dia.: 3 ~ 25mm
- Max. depth of drilling: 1,500mm
- Working table stroke
- Worktable dimensions: 1,300 x 1,800mm
- Table cross travel(X-Axis): 1,600mm
- Spindle head vertical travel (Y-Axis): 1,000mm
- Effective drill stroke (Z-Axis): 1,500mm
- Drive motor
- Spindle motor: 5.5 KW
- Z-Axis: 1 KW
- Y-Axis: 2.5 KW
- X-Axis: 2.5 KW
- Chip Auger: 0.1 KW
- Coolant pump: 3.5 KW X 2
- Automatic lubrication: 0.1 KW
- Total machine power: 19 KW
- Speed
- Drill feed range: 10 ~ 150 mm/min
- Spindle speed range: 0 ~ 6,000 rpm
- Hydraulic system
- Coolant pump pressure range: 0 ~ 100 kg/cm2;
- Pump output: 30 ~ 60 L/min
- Coolant tank capacity: 1,200 L
- Max. weight on table: 8,000kgs
- Net weight: 16,000kgs
- Machine dimensions (Approx): 5,000 x 6,000 x 3,500mm
- Standard accessories
- Paper filter
- Magnetic separator
- High pressure coolant pump
- Tool box
- Leveling screw
- Special accessories
- Coolant chiller
- Coolant oil
- Gun drill
- Guide bush
- Gun drill grinder
- Rubber bush
- ST-1500 Type: Bed Type Deep Hole Drilling Machine
- The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, Ejector pin holes of large type injection molds.
- The rigid honeycomb walled column gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
- Hardened and ground ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface, 16 points per square inch.
- A huge wide and long worktable allows heavy work pieces. And extra wide saddle gives much heavier loading capacity.
- Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
- All box way design provides rigidity for heavy cutting.
- Worktable X-axis, feature heavy duty six balls linear motion guide way and provides stable cutting capacity.
- CNC could be selected with Fanuc or Mitsubishi brands.
- CE mark are available for special required.
- Minimum Order: 1 set
- TEL: 886-4-24221095
- FAX: 886-4-24223797
- E-mail: horngji_jessielin@hotmail.com