Product ID: CNC ST-500

CNC Deep Hole Drilling Machine

Knee Type Deep Hole drilling Machine
Suitable for medium / small mould & irregular workpieces.

Click here for details.

• Capacity
• Number of drill spindle: 1 Quill
• Range of drilling dia.: 3 ~ 25mm
• Max. depth of drilling: 500mm
• Working table stroke
• Worktable dimensions: 600 x 1,000mm
• Table cross travel(X-Axis): 500mm
• Spindle head vertical travel (Y-Axis): 350mm
• Effective drill stroke (Z-Axis): 500mm
• Drive motor
• Spindle motor: 5.5 KW
• Z-Axis: 1 KW
• Y-Axis: 1.5 KW
• X-Axis: 1.5 KW
• Chip Auger: 0.1 KW
• Coolant pump: 3.5 KW
• Automatic lubrication: 0.1 KW
• Machine power rating: 13.5 KW
• Speed
• Drill feed range: 10 ~ 150 mm/min
• Spindle speed range: 0 ~ 6,000 rpm
• Hydraulic system
• Coolant pump pressure range: 0~100 kg/cm2;
• Pump output range: 30 ~ 60 L/min
• Coolant tank capacity: 1000 L
• Max. weight on table: 1,000kgs
• Net weight: 3,500 kgs
• Machine dimensions(Approx): 4,600 x 4,400 x 2,600mm
• Standard accessories
• Paper filter
• Magnetic separator
• High pressure oil pump
• Tool box
• Leveling screw
• Special accessories
• Coolant chiller
• Coolant oil
• Gun drill
• Guide bush
• Gun drill grinder
• Rubber bush

Features:

• Knee Type Deep Hole drilling Machine
• Knee type Gun drilling Machine with Fanuc CNC controller(Mitsubishi control are available)
• This type machines are suitable for the production of waterlines, heat and ejector pin holes of injection molds, hydraulic manifold and heat-exchangers which require multi hole drilling.
• Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust.
• Hardened and ground Main slide ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface, 16 points per square inch.
• Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
• All box way design provides rigidity for heavy cutting.
• Easy positioning of X.Y. axes and setting of stroke and feed.
• The machine could be designed to 2 spindles for special purpose.
• CE mark are available for special required.

• Minimum Order: 1
• FOB: Taichung or Keelung Port, Taiwan
• TEL: 886-4-24221095
• FAX: 886-4-24223797
• E-mail: horngji_jessielin@hotmail.com