Product ID: CNC ST-2000

CNC Deep Hole Drilling Machine

The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, ejector pin holes of large type injection molds.

• Capacity
• Number of drill spindle: 1 Quill
• Range of drilling dia.: 3 ~ 25mm
• Max. depth of drilling: 2,000mm
• Working table stroke
• Worktable dimensions: 2,600 x 1,600mm
• Table cross travel(X-Axis): 2,000mm
• Spindle head vertical travel (Y-Axis): 1,200mm
• Effective drill stroke (Z-Axis): 2,000mm
• Drive motor
• Spindle motor: 5.5 KW
• Z-Axis: 1 KW
• Y-Axis: 2.5 KW
• X-Axis: 2.5 KW
• Chip Auger: 0.1 KW
• Coolant pump: 3.5 KW X 2
• Automatic lubrication: 0.25 KW
• Total machine power: 19 KW
• Speed
• Drill feed range: 10 ~ 150 mm/min
• Spindle speed range: 0 ~ 6,000 rpm
• Hydraulic system
• Coolant pump pressure range: 0 ~ 120 kg/cm2;
• Pump output: 30 ~ 60 L/min
• Coolant tank capacity: 1,200 L
• Max. weight on table: 8,000kgs
• Net weight: 18,000kgs
• Machine dimensions(Approx): 6,000 x 6,000 x 3,500mm
• Standard accessories
• Paper filter
• Magnetic separator
• High pressure coolant pump
• Tool box
• Leveling screw
• Special accessories
• Coolant chiller
• Coolant oil
• Gun drill
• Guide bush
• Gun drill grinder
• Rubber bush

Features:

• ST-2000 Type: Bed Type Deep Hole Drilling Machine
• The Column type Deep hole drilling machine with CNC control are designed for drilling waterlines, Ejector pin holes of large type injection molds.
• The rigid honeycomb walled column gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
• Hardened and ground ways to hardness HRC 50. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface, 16 points per square inch.
• A huge wide and long worktable allows heavy work pieces. And extra wide saddle gives much heavier loading capacity.
• Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
• All box way design provides rigidity for heavy cutting.
• Worktable X-axis, feature heavy duty six balls linear motion guide way and provides stable cutting capacity.
• CNC could be selected with Fanuc or Mitsubishi brands.
• CE mark are available for special required.

• Minimum Order: 1
• FOB: Taichung or Keelung Port, Taiwan
• TEL: 886-4-24221095
• FAX: 886-4-24223797
• E-mail: horngji_jessielin@hotmail.com