Liquid filler
The liquid filler is designed to fill container with liquid, such as plastic or glass bottle, which is also known as filler liquid equipment.
The liquid fillers designed with different mechanisms measure the right amount of liquid and than pour the liquid in the container. Different types of liquid fillers measure the liquid filled in many different ways including the weight of the liquid, the volume of liquid dispensed to the liquid filling heads, the volume of a piston used to dispense the liquid, or even the volume of the liquid inside the container or bottle. This machine is also commonly referred to as a "fill to level" filling machine or cosmetic height filler.
Because this liquid filler operates in a closed loop basis, it is also ideal for handling foamy products. This analysis deals primarily with a lower capacity liquid filler used by small to medium sized companies and excludes high speed rotary liquid fillers typically found only in the mass market beverage industry. This type of filler is perhaps the most widely used machine in small bottle filling operations because it handles a wide range of thin, free flowing liquids as well as liquids with medium viscosity. In contrast, the liquid fillers discussed here are used throughout all industries including food, beverage, chemical, cosmetic and pharmaceutical but at lower speeds; usually less than 200 containers per minute.
The proper type of mechanism for a given application is greatly dependent on the type of liquid to be filled, the characteristics of the liquid filler operation, the type of accuracy that is required in the application, and many other application specifics. This means that the liquid filler fills to a target fill height in the container rather than volumetrically. But it can also be shown that as long as the container specification do not vary greatly, the volumetric accuracy of this machine is excellent.
The Examples of products that work well in this liquid filler are bottled water, liquid soap, motor oil, cleansers and even some dairy products. It can be constructed in both chemical duty versions as well as sanitary versions capable of filling pasteurized products at high temperatures. In fact, most of the market for liquid filler in terms of units sold is for semi automatic equipment that operates at speeds not exceeding 20 containers per minute.
Please also see our hot products as below: liquid filler filling equipment capsule counter counting machine capping machine
Peristaltic pump filler FT-4 can fill liquid from water to gel or lotion. Its component and surface are made of SUS 340.
Specifications:
- Filling Volume: 1 ~ 2,00c.c.
- Accuracy: กำ 0.5-1%.
- Filling speed: 15ml / sec.
- Dimensions: (L) 1,900mm (W) 1,200mm (H) 1,300mm.
- Power required: 110 or 220VAC
- Power consumption: 10 Amp.
Features:
- Emergency button, stops immediately after pressed.
- Digital panel, counting while labeling.
- Design with simplicity in mind.
- Hooper is changeable.
- With peristaltic pump.
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-3-3755721
- FAX: 886-3-3678246
- E-mail: info@mifiller.com