Swing Clamp Cylinders - POSU Enterprise Co., Ltd.

Swing clamp cylinders are used at limit working space, easy to fix the work piece with out additional plate.
This machine with MC clamp is exclusively to mass-produce spare parts.It is a great helper to raise the production efficiency.
The clamping arm of this cylinder will swing around the angle when the piston traveling down, and then keep straight on until the clamping arm clamps the work-piece tightly.
These pull-type cylinders have five standard sizes and two additional plates which can be installed at any angle.
The cylinder is made of aluminum alloy, the surface is processed with the hard membrane, and the inside of it is smooth.It is long-lived to use.
Branded Product.

Model	PAS, PAD	PAS, PAD	PAS, PAD	PAS, PAD	PAS, PAD
Bore Diameter (mm)	Ø25	Ø32	Ø40	Ø50	Ø63
Swing stroke (mm)	9	11	11	13	13
Clamping stroke (mm)	13	15	15	17	17
Operation	Double acting	Double acting	Double acting	Double acting	Double acting
Used fluid	Air	Air	Air	Air	Air
Max. operating pressure	15 kgf/cm²(1.5 MPa)	15 kgf/cm²(1.5 MPa)	15 kgf/cm²(1.5 MPa)	15 kgf/cm²(1.5 MPa)	15 kgf/cm²(1.5 MPa)
The range of pressure	1 ~ 10 kgf/cm²(0.1 ~ 1.0MPa)	1 ~ 10 kgf/cm²(0.1 ~ 1.0MPa)	1 ~ 10 kgf/cm²(0.1 ~ 1.0MPa)	1 ~ 10 kgf/cm²(0.1 ~ 1.0MPa)	1 ~ 10 kgf/cm²(0.1 ~ 1.0MPa)
Standard angle of rotation	90° ± 2° (Optional angle 0°¡B 45°¤Î60°)	90° ± 2° (Optional angle 0°¡B 45°¤Î60°)	90° ± 2° (Optional angle 0°¡B 45°¤Î60°)	90° ± 2° (Optional angle 0°¡B 45°¤Î60°)	90° ± 2° (Optional angle 0°¡B 45°¤Î60°)
Rotating direction	Clockwise or counter clockwise	Clockwise or counter clockwise	Clockwise or counter clockwise	Clockwise or counter clockwise	Clockwise or counter clockwise

POSU Enterprise Co., Ltd.