S-31, S-31D
CYLINDRICAL EDGE ROLLING MACHINE
This machine use to roll the PVC or PET cylindrical edge into the inner side. It is used to instead of injection tank. This method could used only about 0.2mm ~0.3mm PVC or PET sheet to gluing a cylindrical first. We use this machine to rolling the edge to let it strong when we touch it.
Functions: This machine is used to roll the PVC cylindrical edge into the inner side.
1. Easy operation, do not speed a skill operator.
2. Easy adjustment for deferent size.
3. One mould could make several sizes.
4. Without mistake rolling product, normal of the Manu machine will have a lot of fault form the rolling. By this machine all the product will exact.
5. Two pieces rolling at same time. Saving the labor cost. We accept the special order for rolling 3pcs or 4 pieces machine.
6. The S-31D have 4 pcs of rolling device, S-31 have 2 pcs of rolling device.
Specifications:
- S-31
- Max High Of Cylindrical :350mm
- Max. Diameter Of Product:210mm
- Mechanical Dimensions:900mm L X 520mm W X1430mm H
- Heater 300W X 2 PIECES
- Weight 250 KGS
- Operation Speed:8-10 SEC/PCS X2 Moulds
- S-31D
- Max High Of Cylindrical :350mm
- Max. Diameter Of Product:210mm
- Mechanical Dimensions:1800mm W X 520mm L X1430mm H
- Heater 300W X 4 PIECES
- Weight 250 KGS
- Operation Speed:8-10 SEC/PCS X4 Moulds
- S-31GT cylindrical gluing mould and tool
- This is special offer only for order the cylindrical edge rolling machine.
- It is for gluing the PVC or PET rigid sheet into cylindrical before rolling.
- This item did not sell in separate
- Data to Glue for gling the cylindrical
- This data also only offer with the machine.
Ordering information:
- Minimum Order: 1 set