Hydraulic Cylinder
The hydraulic cylinder a very useful tool when everyone intends to use it as double acting applications. The tube of the machine is skived and roller burnished and precisely finished steel for extended the seal life. It’s hard chrome plated provides corrosion resistance and minimizes tube scoring and seamless steel tube honed to 10/16 micro inch finish while the thicker wall is much better than traditional low pressure hydraulic cylinder. Because the ticker wall can decreases the wear on piston seal, the tube surface can give additional protection from leaks.
The cartridge is floating and self aligning bearing, which is made from ductile iron with the option of bronze or slip tuff coating, is retained by cap screws and the chrome plate providing for strength and shock resistance. The benefit of the floating condition of the cartridge on the hydraulic cylinder is to reduce the piston rod misalignment as deleting side loading. Therefore, it’s easy to remove the rod seal from a wiper maintenance without any requiring special additional tools to disassemble the product.
The rotating gland on the equipment is adjustable by using a spanner wrench to rotate the gland and can be rotate in 360 degree. It’s a high quality adjustable vee packing that supported on both ends by nylon bearings and offer maximum seal life while increase support against side loading during operation. The hydraulic cylinder allows users to make port alignments as they require while the port is recessed to increase the design of the slender product. Some of the ports are on the fixed base and some of the ports are located on the rotating gland. The port on the gland is in a clock-wise direction, vise versa is applicable.
It’s not suggested to rebuild the construction and replacement of the components when the product is broken, however, if you want your work more efficient, we suggest that to replace an entire hydraulic cyclinder is a good choice. Please feel free and contact us for further information about out machine product today!
Features:
- Range of bore dia. from 40 ~ 250 mm.
- Pressure rated 7 MPa, 14 MPa.
- Optional max. 70 MPa.
- The specification can be made per customer's - request (OEM / ODM).
