Specifications:
- HB 42-3M
- Bar diameter: 5 - 42 mm.
- Max. bar length: 3,100 mm.
- L x W: 4,250 x 480 mm.
- HB 42-2.5M
- Bar diameter: 5 - 42 mm.
- Max. bar length: 2,600 mm.
- L x W: 3,650 x 480 mm.
Features:
- Hydraulic oil pressure to the piston / pusher assembly feeds the barstock into the lathe spindle.
- The patented valve in the piston allows a controlled volume of oil to create an evenly distributed oil film between the guide tube and barstock. This allows the bar to urn without vibration nor noise.
- Rotation of the bar creates the hydrodynamic effect whereby the bar is supported and cushioned by the oil film.
- If the spindle speed is zero, the hydrodynamic support is zero and the bar rests on the feed tube.
- The revolving bar produces increased oil pressure and the bar is lifted from the bottom of the feed tube.
- With increasing speed, the hydrodynamic force increases and the bar revolves centrally.
- Oil entering the guide tube through the piston is the only way of achieving full hydrodynamic support throughout the length of the barfeed.
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-2-29964918
- FAX: 886-2-29933081
- E-mail: