Mold Temperature Controller-Water Circulation Mold Temperature Controller
WEDLON AUTOMATION CO., LTD. is a highly-qualified, Taiwan-based supplier and manufacturer of Water Circulation Mold Temperature Controller, plastic molding, and plastic molded injection. The supplier has been recognized as one of the most professional manufacturers in the industry since 1993. With both experience and innovation, the supplier is confident of providing buyers with quality Water Circulation Mold Temperature Controller.
Water Circulation Mold Temperature Controller
The Mold Temperature Controller-Water Circulation Mold Temperature Controller is major for controlling the temperature of the mold in the plastic injection molding machine.
- The temperature control adopted micro processor (P.I.D) touching type ,there is stored automatic calculation inside, precise and reliable, it can control within ± 1°C and save electricity over 35%
- Medium circulation pipe with stainless steel.
- Automatic start and exhaust air.
- Automatically reduce the temperature after stop pump,automatically shut down after set time.
- Automatically recover water circulation from the mold.
- Circuit Beaker.
- Motor reverse protective lamp.
- Water shortage protective lamp.
- Pump overload protective lamp.
- Outlet water pressure gauge.
- By-Pass system.
- Buzzer.
- Inlet temperature digital dislay gauge.
- Phase failure protecter.
- OEM/ODM Product
- Branded Product
- Buyer's Label Offered
- CE
| Model | TWD-120(1HP) | TWD-120(2HP) | TWD-120(3HP) |
|---|---|---|---|
| Temp. Control Range | 40 ~ 120°C | 40 ~ 120°C | 40 ~ 120°C |
| Temp. Control Accuracy | ± 1°C | ± 1°C | ± 1°C |
| Temp. Control Method | Double proportional integral derivative | Double proportional integral derivative | Double proportional integral derivative |
| Power | 3Ø 220V 60Hz (or other) | 3Ø 220V 60Hz (or other) | 3Ø 220V 60Hz (or other) |
| Heat Transfer Medium | Water | Water | Water |
| Cooling Method | Direct Cooling | Direct Cooling | Direct Cooling |
| Heating Capacity | 8 Kw | 8 Kw | 8 Kw |
| Pump Power | 1 HP | 2 HP | 3 HP |
| Max Pump Flow | 135 l/min | 180 l/min | 268 l/min |
| System Pressure | 5 kg/cm² | 6 kg/cm² | 6 kg/cm² |
| Power Supply | 9 Kw | 9.5 Kw | 11 Kw |
| Cooling water pipe | 1/2 | 1/2 | 1/2 |
| Circulation water pipe | 3/8 x 4 (or other) | 3/8 x 4 (or other) | 3/8 x 4 (or other) |
| Machine Size | 800 x 300 x 720 mm | 800 x 300 x 720 mm | 800 x 300 x 720 mm |
| Weight | 72 kg | 79 kg | 80 kg |
Main Products:
Injection Molding Robot, Sprue Picker, Grusher, Grinder, Granulator, Conveyor, Mold Temperature Controller, Chiller, ProportionalMixers, Mixer, Blenders, De-Power, Auto Loader, Drawer Type Mold Rack, Dehumidifying Material Dryer, Compressed Air Dryer, Automation Auxiliary Equipments For Plastic Inje
