Mold Temperature Controller-Oil Circulation Mold Temperature Controller
Product ID: TOD Series
The Mold Temperature Controller-Oil Circulation Mold Temperature Controller is major for controlling the temperature of the mold in the plastic injection molding machine.
- The temperature control adopted micro processor (P.I.D) touching type ,there is stored automatic calculation inside, precise and reliable, it can control within ± 1°C and save electricity over 35%.
- Medium circulation pipe with stainless steel.
- All series adopting Taiwan brand pump.
- Automatically reduce the temperature after stop pump,automatically shut down after set time.
- Automatically recover oil circulation from the mold.
- Circuit beaker.
- Motor reverse protective lamp.
- Oil shortage protective lamp.
- Pump Overload Protective Lamp.
- Overheat thremost protective lap.
- By-Pass system.
- Buzzer.
- Inlet temperature digital display gauge.
- Phase failure protecter.
- OEM/ODM Product
- Branded Product
- Buyer's Label Offered
- CE
| Model | TOD -180(1HP) | TOD -180(2HP) |
|---|---|---|
| Temp. Control Range | 60 ~ 180°C | 60 ~ 180°C |
| Temp. Control Accuracy | ± 1°C | ± 1°C |
| Temp. Control Method | Double proportional integral derivative | Double proportional integral derivative |
| Power | 3Ø 220V 60Hz (or other) | 3Ø 220V 60Hz (or other) |
| Heat Transfer Medium | Heat Transfer Oil | Heat Transfer Oil |
| Cooling Method | Indirect Cooling | Indirect Cooling |
| Heating Capacity | 9 Kw | 9 Kw |
| Pump Power | 1 HP | 2 HP |
| Max Pump Flow | 60 l/min | 90 l/min |
| System Pressure | 6 kg/cm² | 6 kg/cm² |
| Expansion Tank Capacity | 7 Liter | 7 Liter |
| Cooling water Pipe | 1/2" | 1/2" |
| Circulation Oil Pipe | 3/8" x 4 | 3/8" x 4 |
| Machine Size | 620 x 300 x 710 mm | 620 x 300 x 710 mm |
| Weight | 76 Kg | 80 Kg |
Main Products:
Injection Molding Robot, Sprue Picker, Crusher, Grinder, Granulator, Conveyor, Mold Temperature Controller, Chiller, Proportional Mixer, Mixer, Blenders, De-Powder, Auto Loader, Drawer Type Mold Rack, Dehumidifying Material Dryer, Compressed Air Dryer, Automation Auxiliary Equipments For Plastic Inj
Related Products
Contact Details
CEO: Mr. Hank Chang
Sales Contact: Mr. Hank Chang
Minimum Order:1 Set
FOB:Taiwan
Address:No.27 , Lane 1 , Beinei St. , Shu-Lin Area, Shin Pei City 238 , Taiwan
Tel:886-2-26826777
Fax:886-2-26826778
E-mail:
wedlon@wedlon.com.tw